RCA L32WD26D warranty What Else Can I Do?

Page 39

Other Information

Noisy stereo reception

•The station might be weak. Access the Audio menu, highlight MTS and then choose Mono.

No picture, no sound but TV is on

•The channel might be empty — change channels.

•If you’re watching your VCR and it’s connected with coaxial cable to the ANT jack, tune the TV to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Also check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR).

Sound okay, picture poor

•Check antenna connections. Make sure all of the cables are firmly connected to the jacks.

•Try adjusting sharpness function to improve weak signals. Go to page 29 for more instructions.

Black box appears on the screen

•Closed-captioning might be on. Check the Analog or Digital Caption option in the Setup menu. Go to page 31 for more instructions.

Problems with HDMI Connection

•Make sure the HDMI or DVI device is turned on and the cables are firmly connected. If problems still occur, turn off your device. Re-connect your device. Reset the power by unplugging the power cord and plugging it back in.

•If you are tuned to the HDMI input and you’re receiving Unusable Signal message on-screen, press the INFO button on the remote. If Acquiring Channel appears in the channel banner, the HDMI or DVI device isn’t responding. Contact the manufacturer of the HDMI or DVI device for further assistance.

•If you tune to the HDMI input and you see snow, the video goes in and out, or the video takes a long time to appear, your HDMI or DVI device is having trouble sending video information to the TV. Re-connect your device. Reset the power by unplugging the power cord and plugging it back in. If problems persist, try connecting the Y Pb Pr jacks instead if they are available or contact the manufacturer of the HDMI or DVI device for further assistance.

•If you have black bars on each side of your picture, the device you connected might have a switch or a menu option allowing you to change the picture quality output that will fix this. Choose either 720p or 1080i.

The Remote Control Doesn’t Work

•Something might be between the remote and the remote sensor on the component. Make sure there is a clear path.

•Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the remote.

Problems with V-Chip/Parental Controls

The rating limits don’t work

•You must lock the settings. Go to the Main Menu (press MENU on your remote), select LOCKS, select V-Chip Set- ON.

I don’t remember my password and I want to unlock the TV

•If you forget your password you can reset it. Turn the volume all the way down using the top panel VOL- button on the TV. Continue holding the button and press the 0 number button on the remote at the same time for about 5 seconds. Enter a new password.

What Else Can I Do?

If you’ve been through the Troubleshooting section and nothing has fixed your problem, try rebooting your TV. Note that after a reboot you may need to run your TV through the setup process again. To do a reboot, unplug the power cord from the wall outlet, power strip, etc. Keep your TV unplugged for about 5 minutes. Then plug the TV back in, turn on the TV, and see if the problem is fixed. If the problem remains, then please visit www.rca.com/television for updated FAQs or contact RCA Customer Support at the support number provided in your Warranty under How To Get Service.

Chapter 6

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents LCD Users Guide Class Laser Product Important InformationO U N D C L a M P S Important Safety InstructionsTable of Contents Things to Consider Before You Connect Connections & SetupWhat You Need Connections & SetupGet the Picture Getting ChannelsJacks Used Cables Needed Go to Choose Your ConnectionComponent Video Advanced Connection Video Basic ConnectionConnecting the Device with Video Basic Connecting the Device with Component Video AdvancedViewing the Picture from the Connected Device PC/HDMI Audio Hdmi ConnectionConnecting the Device Viewing the PC PC ConnectionTurn on the TV/DVD How to Use the Remote Control to Complete the Initial SetupPlug in the TV/DVD Put Batteries in the RemoteComplete the Channel Search Complete the Initial SetupSet the Signal Type Set the Menu LanguagePC/HDMI Audio used for DVI only Provides audio Explanation of Jacks in alphabetical orderTop of Your TV/DVD Search Buttons on the Remote ControlConnections & Setup Loading and Playing Discs Using Different MenusPlaying Discs Regional CodingUsing a Disc Menu Disc Playback Features Using the RemotePlaying Discs Selecting Subtitles Disc FeaturesUsing the Jump Feature DVD Disc Info DisplayUsing the Repeat Feature Changing the Audio LanguageTo Select a Repeat Option Using the Program Play Feature Switching between Standard and Random PlayChanging the Camera Angle Playing Other Music and Jpeg Files Music FilesJpeg Files Using the TVs Features Channel BannerParental Controls and V-Chip US V-Chip TV Ratings Using the TV’s FeaturesHow V-Chip Works Lock/Unlock Parental ControlsBlocking Specific Content Themes Chip Movie Rating LimitFuture Rating Region Additional Features Picture ProcessingScreen Formats Using the TVs Menu System Using the Menu SystemPicture Menu Using the TVs Menu System Additional Options in PC ModeAudio Menu Setup Menu Locks Menu Option MenuChanging the Menu, Subtitle, or Audio Language Using the DVDs Menu SystemDVD’s Menu System Languages MenuUsing the DVDs Menu System Sound MenuParental Control Menu Language Code List Other Information Frequently Asked Questions FAQsOther Information TroubleshootingTV Problems What Else Can I Do? Mounting Your TV to the Wall Care and CleaningUS V-Chip Rating System Chip Rating ExplanationsFor how long after your purchase Limited WarrantyIf you purchased your product outside the United States TTE Technology, Inc FCC Information
Top Page Image Contents