RCA 27F500TDV manual Stereo recording, Playback, Second Audio Program SAP, Output selection

Page 41

Stereo recording and playback / Second Audio Program (SAP)

Stereo recording and

When a MTS STEREO broadcast is

playback

The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV

received, the word STEREO will ap- pear on the screen and the program can be viewed or recorded in stereo.

STEREO

broadcasts.

NOTES:

When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural.

When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cord not connected), the sound will be monaural.

The Hi-Fi STEREO recording procedure is the same as for normal recordings.

NOTE:

When using a CATV system, stereo TV programs may be transmitted over a mono cable channel. In this case the word "STEREO" will not appear and the sound will be in mono.

Output selection

When viewing an MTS STEREO TV program, or playing a prerecorded VHS Hi-Fi STEREO video tape, press AUDIO SELECT to select how the audio will be heard through the speakers. Normally set to the Hi-Fi STEREO position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The "R" and "L" positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO video tape or TV program. Each time when you press the button, OUT- PUT SELECTION display appears on the screen for several seconds. Refer to the chart below.

OUTPUT

SOUND HEARD ON BOTH

SELECTION

SPEAKERS

 

 

STEREO

STEREO

L ch

LEFT CHANNEL AUDIO

R ch

RIGHT CHANNEL AUDIO

MONO

MONO

 

 

Second Audio Program (SAP)

Your unit is fitted with a SAP broadcast system which enables you to switch to a second audio program when viewing a selected channel.

This function applies only when the program is broadcast in multi-languages through the SAP broadcast system.

1 Press TV MENU in the TV/VCR mode. Then press or to select "TV SETUP", then press ENTER.

2 Press

or

to select “SAP”.

 

TV SETUP

 

 

 

V-CHIP SET

 

 

 

 

 

 

 

 

Then press ENTER to select “ON”.

 

ON/OFF TIMER

 

 

 

 

 

 

PICTURE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO

 

 

 

 

 

 

 

 

Then press TV MENU until the

 

SURROUND

ON

OFF

 

 

STABLE SOUND￿ ON

OFF

 

menu screen is cleared.

 

SAP￿

ON

OFF

 

 

 

 

 

//ENTER/MENU

 

 

Listening to SAP

When the unit is turned on or a channel selection is made, make certain the letters "SAP" appear on the screen. This means that the "Second Audio Program" broadcasting is available.

STEREO SAP

SAP

OR

41

Image 41
Contents TV/VCR/DVD Users Guide Class Laser Product Important Safeguards Important Safeguards To USE AC Power Source Power SourceColor TV with DVD/CD Player/Video Cassette Recorder FeaturesTV Section VCR SectionContents Front Rear Parts and functionsOPEN/CLOSE button DVD RF in VHF/UHF jackButton descriptions top left to right Remote controlRemote control basics Battery precautionsInserting Batteries OperationMatching Antenna connectionsCable TV connections 75 ohm Ohm Cable Jack Catv Cable Switch To unit SplitterJack Ohm Coaxial Cable Catv CableUsing an AV Amplifier with built-in digital surround Using an Audio AmplifierConnections to other equipment Rear of unitDVD mode this key will not operate Using the audio/video inputsTo connect the unit to a camcorder Camcorder Front of unitEnter Setting the languageSet the clock manually see Auto clock settingPress or to select your time zone, then press Enter Press or to select Standard TIME, then pressGMT Hours GMT 10 hoursSystem Setup menu, then Manual clock settingPress Press To select Clock SET option, then pressTV operation TV operation Closed caption What is Closed CAPTIONING?TV VHF/UHF channels Catv Cable TV channels To memorize channelsNumber buttons 0-9, or or To select CH SetupPress To select Auto CH Number buttons 0-9, then Setting the V-ChipTV-Y OFFTV-G TV-PGSetting the V-Chip Example Turning on the TV to channel 12 at 700 AM, MON To set the on timerPress or to select on TIMER, then press Enter Press or To select OFF To set the off timerTIMER, then press Enter Will appear Press To select TV Press TV/VCR. Press TV/MENU, the TV/VCR menu screenPress To select PIC TURE, then press EnterUntil the Menu Sound control adjustmentCancel Use only video cassette tapes marked Loading Loading and Unloading a cassette tapeUnloading To prevent accidental erasureCassette tape playback Forward/Reverse picture search modeTo stop playback To rewind the tape or forward it rapidlySpecial playback Zero Return function Zero Return function / Video index search systemVideo index search system Index SearchRecording and viewing the same TV program Recording a TV programPress the number buttons 0-9 or CH +/- to select Channel to be recordedTo stop recording Auto Rewind featureTo stop recording temporarily To Display VCR operation StatusTo cancel OTR One-touch Timer Recording OTRChannel cannot be changed during recording Press Direct Channel SelectionTimer recording To cancel a program To confirm the settingsTimer recording special case Case Timer programs-overlapSetting the stable sound Setting the surround soundTo cancel the surround sound mode To cancel the stable sound modePlayback Stereo recordingSecond Audio Program SAP Output selectionDuplicating a video tape Duplicating a video tapeConnection with second Video recorder PAUSE/STILLDisc Preparation Preparation / Status display of discStatus display of disc DVDPower Playback procedurePress OPEN/CLOSE or PlayReview Playback Fast Forward PlaybackStill Playback Frame AdvanceMp3 CD Information Mp3 playbackLimitations on mp3 CD playback Refrain from making too many sub-foldersZooming Zooming / Locating desired sceneLocating Desired Scene Press Jump during playProgram menu Repeat/Random/Program playback and Repeat A-BRepeat A-B Audio CD /mp3 CDChanging soundtrack language Changing soundtrack language / SubtitlesSubtitles Turning the Subtitles On and OffChanging angles Changing angles / Title selection / DVD menuTitle selection DVD menuIf you want to return to the previous menu, press or Return Setting languageOther Selection Menu/Audio/Subtitle Off subtitleReturn Setting the aspect ratio of TV screenStatus on screen display Press or to select Sound Dynamic Range ControlPress or Enter to se- lect DRC Press or Enter to se- lect On or OffParental control setting Press number buttons To change the parental levelTemporary disabling of rating level by DVD disc Rating level will remain disabled until the disc is ejectedLanguage code list Symptoms Cause Possible Solutions Power Problems and troubleshootingTV Broadcast Reception VCRSymptoms Cause Possible Solutions DVD Video head cleaningRemote Control Video head cloggingGeneral SpecificationsRCA TruFlat TV/DVD/VCR Combination Limited Warranty WarrantyIf you purchased your product outside the United States Thomson

27F500TDV specifications

The RCA 27F500TDV is a versatile television that delivers a combination of classic design and modern technology, making it a suitable choice for various viewing environments. This 27-inch TV features a compact size, perfect for smaller spaces like bedrooms, kitchens, or apartments while still providing an engaging viewing experience.

One of the standout features of the RCA 27F500TDV is its high-resolution screen. With a 27-inch display, viewers can enjoy a crisp and clear picture quality that enhances the overall viewing experience. The TV employs advanced color technology, ensuring vibrant and accurate color reproduction. This feature is particularly beneficial for individuals who appreciate watching movies, sports, or playing video games, where clarity and color accuracy significantly impact the experience.

The RCA 27F500TDV incorporates several modern connectivity options, making it easy to connect various devices. With multiple HDMI ports, users can easily link gaming consoles, Blu-ray players, and streaming devices, allowing for a seamless multimedia experience. Additionally, the inclusion of USB ports provides the convenience of viewing photos and videos directly from compatible USB storage devices.

In terms of audio, the television is equipped with built-in speakers that deliver decent sound quality for everyday use. However, for those seeking a more immersive sound experience, RCA encourages pairing the TV with external sound systems or soundbars through its optical audio output.

Another feature worth noting is the television's Energy Star certification. This designation signifies that the RCA 27F500TDV is designed to meet strict energy efficiency guidelines, helping users save on electricity bills while reducing their carbon footprint. It's a responsible choice for environmentally conscious consumers who value sustainability alongside functionality.

Furthermore, the RCA 27F500TDV includes user-friendly features such as an intuitive remote control, making it easy to navigate channels, adjust settings, and access different multimedia content. It also supports various viewing modes, allowing users to select the settings that best suit their viewing preferences, whether they're watching a cinematic movie or tuning into a live sports event.

In summary, the RCA 27F500TDV is a compact television that effectively combines functionality, connectivity, and energy efficiency. With its high-resolution display, modern connectivity options, and user-friendly features, it offers a well-rounded viewing experience that fits comfortably in a variety of living spaces.