RCA MST65BKR Operation and adjustment, Until both tilt mechanisms are firmly tightened

Operation and adjustment

1.To change the tilt angle of your display, hold the display fi rmly in place and

loosen the tilt mechanisms using the long Allen key (J) from the hardware kit (see Fig. 10). Move your display to the desired position, and then re-tighten the tilt mechanisms. If your display is in the non-tilt position, you will need to push up gently on the display before you can move it. Do not release the display

until both tilt mechanisms are firmly tightened.

2.Periodically clean your mount with a dry cloth. Inspect all screws and hardware

at regular intervals to ensure that no connections have become loose over time. Fig.10 Re-tighten as needed.

English

5