INTERFACE
REARVIEW
6 Audio Output |
|
| |||
| This connector is for output of analog audio and is compatible with Molex 70553. Choose a | ||||
| suitable connection cable. | ||||
| Pin | Name |
| Function |
|
| 1 | L |
| Left channel audio output |
|
| 2 | G |
| Ground |
|
| 3 | G |
| Ground |
|
| 4 | R |
| Right channel audio output |
|
7 Device Configuration Jumper | |||||
| The Switch changes to ON when a jumper is added (Pin 1 is on | ||||
| Verify that the power is OFF before changing the jumper setting. | ||||
| The factory default forPin # 1 is ON. | ||||
| Pin | Name |
| Function |
|
| 1 | MA | on | The drive is the master device |
|
| 2 | SL | on | The drive is the slave device |
|
| 3 | CS | on | Set the drive to Cable Select |
|
| 4 |
| Reserved |
| |
| 5 |
| Reserved |
| |
8 | Host IDE Interface | ||||
| Use a | ||||
| length for this cable is 18 inches. | ||||
9 | DC Input |
|
| ||
|
|
|
|
|
|
|
| Pin | Name | Function |
|
|
| 1 | +12 | Power supply input for DC +12 V |
|
|
| 2 | G | Ground |
|
|
| 3 | G | Ground |
|
|
| 4 | +5 | Power supply input for DC +5 V |
|
8
En