RCA 2CW4, 13CW4, 6CW4 manual Medium CERAMIC-WAFER Twelvar Base, PIN-ALIGNMENT Gauge

2CVV4, 6CVV4, 13CVV4

MEDIUM CERAMIC-WAFER TWELVAR BASE

SOCKET INSERTION

PLANE METAL SHELL

•

INDEX GUIDE

LARGE LUG

600

. 280 "OIA•

• 21O''olA •

•140"OIA .

•070' lA.

SMALL LUG

•

92CM-IQ478Rl

JEDEC	No.	NAME		PINS
E12-64		l2-Pin	Base	1,2,3,4,5,6,7,8,
				9,10,11,12
ES-6S		5-Pin	Base	2,4,8,10,12,	2)
				(Note
Note	I:	Maximum O.D. of	O.440 u is	permitted along	the
0.190" lug length.

Note 2: Pins 1,3,5,6,7, and 9 are of a length such that

their ends do not touch the socket insertion plane .

Pin 11 is omitted.

PIN-ALIGNMENT GAUGE

Base-pin positions and lug positions shall be held to toLerances such that entire length of pins and lugs will without undue force pass into and disengage from fLat­ plate gauge having thickness of a.25 ft and tweLve holes of 0.0350" ± 0.0005" diameter located on four concentric

circles as follows: Three holes located on 0.2800" ± 0.0005". three holes located on 0.2100" ± O.OOOS",three holes located on 0.1400" ± 0.0005", three holes located on 0.0700" ± 0.0005" diameter circles at specified an~les with a tolerance of ± 0.08 0 for each angle. In additIon, gauge provides for two curved slots with chordal lengths of 0.2270" ± 0.0005" and 0.1450" ± 0.0005" located on 0.4200" ± 0.0005" diameter circle concentric with pin circles at 1800 ± 0.080 and having a width of 0.0230"

t0.0005".

- 7 -