RCA VR688HF manual Use Setup menu to auto channel search and auto clock set, SET Time Zone

Setting Up the VCR

Startup

8. Use SETUP menu to auto channel search and auto clock set.

Follow the steps on the screen to auto channel search and automatically set the clock*. If the SET TIME ZONE or SET DAYLIGHT SAVINGS screen appears, follow step A or B below. If the SETUP menu appears, skip to step C.

A.If the SET TIME ZONE screen appears, select a time zone:

Press the number on the remote (1-6) corresponding to the ÒstandardÓ time zone you live in. If you do not know your time zone, press 7 and an automatic setting will be made.

If you select Automatic for your time zone, the VCR will set the clock using the first Coordinated Universal Time information it finds. If the time is not correct, select a time zone or set the clock manually. If the time is incorrect by a few minutes (more than one minute), the local station may not be transmitting the correct time.

B.If the SET DAYLIGHT SAVINGS screen appears:

Press 1 if your area observes daylight savings time from April to October or press 2 if your area does not observe daylight savings time. If you do not know, press 3.

The VCR will set the time according to the information received from the broadcast.

C.When the auto channel search SETUP screen appears:

Press 1 if you would like the VCR to search for and store all available channels. Press 2 if you wish to skip this step.

If you skip auto channel search during setup the auto clock set feature will not be performed in this sequence.

D.Press MENU•PROG on the remote if all antenna or cable connections are completed. Auto Channel Search will be performed followed by automatic clock set.

If The Auto Clock Set was unsuccessful message appears, you can press 1 to set the clock manually or try auto clock set again. The clock must be set before you can use the timer recording feature.

SETUP

The Auto Clock Set was unsuccessful. Would you like to set the time and date?

1 Set Time and Date

2 Skip this step

Try Auto Clock Set Again: If you think there is a local station (usually PBS) broadcasting the XDS (time) information, make sure the Auto Clock Set feature is set to ON on the TIME menu (press 2 to exit SETUP, press MENU•PROG to display the VCR MAIN MENU, press 3 to display the TIME menu, and press 2 to turn the Auto Clock Set feature ON). Tune the VCR to the channel you believe is broadcasting the information before turning off the VCR. If the time does not set within ten minutes, XDS information is not available. Set the time and date manually.

Set Clock Manually: Press 1 and follow the directions on the following page to manually set the clock.

* Signal not available in all areas.

SET TIME ZONE

What is your time zone?

1Eastern

2 Central

3 Mountain

4 Pacific

5 Alaska

6 Hawaii

7 Automatic

Press MENU to continue

SET DAYLIGHT SAVINGS

Does your area observe Daylight Savings Time from April to October?

1 Yes, DST is observed

2 No

3 Automatic

Press MENU to continue

SETUP

Would you like the VCR to search for and store all available channels?

1 Search for channels

2 Skip this step

Make sure all antenna connections to the VCR are complete.

Press MENU when ready

SETUP

The VCR is now setting the clock. This may take several minutes.

Press MENU to cancel

continued on next page

14