RCA DRC7005N manual To play a disc or a show you’ve, Recorded to the Digital Media Recorder

Chapter 1: Connections and Setup

CABLEIN CAB1bLEOTU

Signal from cable or off-air antenna

1a

NotesroaboutmCablecableLineboxes:RSignalSplitte

If you have questions about using a cable box with the Digital Media Recorder, consult your cable company. RCA can only provide general instructions as cable service and cable boxes differ in various areas.

You must view premium cable channels through the Digital Media Recorder if you use this connection because only regular cable channels are being sent to the TV (or VCR) via the 2 Way Splitter. If you have a digital cable box, you need to purchase a special type of splitter— the one shown is only for regular, analog cable boxes.

	1c DigitalMediaRecorde		R		R		G-LINK	IRSAT COAXIALOPTICAL		ONSCANO
			INPTU	S-VIDEO	OTPU	TU			COMNENT
		RANTIPENNATU/CABLE	L	COMVIPODESOITE	L	3c		DIGITALADUIO	VIPDYbEPOOTPU TU
				ADUIO					Pr		PROG.
		3a
	3b							Choose
						3d
							either 3b, or 3c,
							or 3d for video
	1e						connection to TV.
1d	VIDEO L R S-VIDEO	B	R
	TVCABLE/ANTENNA IINNPPTTUU21	COMYPONENPTVIDEOIPNPTU

The back of your TV might look different than the one pictured here.

Connection

OTAINTUENNRTOOMTA to VCR is

optional.

The back of your VCR might look different than the one pictured here.

If you connect your components as described, you must access different Video Input Channels on your TV to see programming— whether the programming is a regular TV show, a program you saved to the Digital Media Recorder’s hard disk drive, a videotape you’re playing in the VCR, or a disc you’re playing in the Digital Media Recorder. If you don’t know how to access Video Input Channels on your TV, go to page 16 for help. A general explanation, based on the connection shown above, follows:

To watch one program while you record another:

Tune the TV to its Input 1 channel or Vid 1 channel

Tune the Digital Media Recorder to the cable box channel (usually channel 2, 3, or 4).

Tune the cable box to the channel you want to record.

Press the RECORD button on the Digital Media Recorder.

Use the buttons on the TV (or the TV’s remote control*) to tune to the channel you want to watch — you won’t be able to pause live TV because you aren’t watching TV through the Digital Media Recorder.

To play a disc or a show you’ve	Tune the TV its Input 1 channel or Vid 1 channel.
recorded to the Digital Media Recorder:
To play a videotape:	Tune the TV to the VCR input channel (usually channel 3 or 4).

If you need help finding your TV’s various Video Input Channels, go to page 16.

*The remote control packed with your Digital Media Recorder is capable of being programmed to operate many brands and models of TVs and VCRs. For instructions, go to page 19.

6