Recording a Program
Recording While You’re Away (Timer Recording)
Checking or Clearing VCR Plus+ or Timer Recordings
1.Press MENU on the remote to display the VCR MAIN MENU.
2.Press 2 to display the TIMER RECORDINGS menu.
3.Press 2 to display the REVIEW EXISTING PROGS menu. Each entered program is displayed for a few seconds in sequence.
4.Press MENU for next program or CLEAR to erase the program.
VCR MAIN MENU 1 VCR PLUS+
2 TIMER RECORDINGS
TIMER RECORDINGS
1 CREATE A NEW PROGRAM
2 REVIEW EXISTING PROGS.
PROGRAM 1 | (ONE TIME) |
CHANNEL | 08 |
START TIME | 02:10 PM |
END TIME | 03:35 PM |
START DATE | 02/02/96 FRI |
TAPE SPEED | SLP |
PRESS CLEAR TO DELETE PRESS MENU FOR NEXT PROG
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the VCRÕs AUDIO and VIDEO IN jacks. Recording from the line input is convenient if you have a satellite receiver or similar component attached to these jacks.
To timer record from the component connected to the VCRÕs line input, press INPUT on the remote to enter VIDEO instead of the channel number on the TV screen during timer programming.
PROGRAM 1 (ONE TIME)
CHANNEL | VIDEO |
START TIME | |
END TIME | |
START DATE | |
TAPE SPEED | SLP |
PRESS CLEAR TO CORRECT PRESS MENU TO EXIT
29