Printwheels
Removing the Printwheel
1.Tilt the sound shield toward you.
2.Remove the ribbon and correcting cassettes.
3.Locate the print hammer release lever (left of the print hammer). Pull the lever forward until the print hammer mechanism springs away from the printwheel.
4.Lift the printwheel out.
Inserting a Printwheel
1.Drop the printwheel between the print hammer and the typing guide with the type style name facing you.
2.Push the print hammer release lever back until the print hammer mechanism snaps into place.
3.Replace the ribbon and correcting cassettes.
4.Return the sound shield to its original position. The unit should automatically reinitialize. If this does not occur, check to make sure the sound shield is closed securely and, if necessary, turn your machine off, and then on again.
Smith Corona Corporation |