Settingtheclock, Bq Eject Button | Audiovox 990 instruction

OPERATING INSTRUCTIONS

bq EJECT BUTTON ( )

Tape playback is stopped and the cassette is ejected by pressing this button, which also has the function of switching over to radio operation.

NOTE: Never leave a cassette engaged in the player when not in use. Doing so can cause damage to the cassette and/or mechanism. Always press the eject button and remove the cassette when leaving the vehicle.

br DISPLAY CALL SELECTOR (CALL) During radio operation, the station frequency will be shown on the display panel. Pressing this button will cause the time to be displayed for 5 seconds before returning to frequency read- out.

During cassette operation, the time will always be shown on the display panel.

bsHOURADJUSTBUTTON(H)

This button is used to adjust the hours on the built-in quartz clock. The button is recessed to prevent accidental engagement so a toothpick, pen point or similar object should be used to activate it.

bt MINUTE ADJUST BUTTON (M)

This button is used to adjust the minutes on the built-in quartz clock. The button is recessed to prevent accidental engagement so a toothpick, pen point or similar object should be used to activate it.

SETTINGTHECLOCK

1.With the vehicle ignition switch “on”, turn the unit off or insert a cassette into the tape door so that the time is showing on the display panel.

2.Using a toothpick, pen point or similar thin object, press the Hour Adjust button bs to adjust the hours to the correct setting.

3.Using a toothpick, pen point or similar thin object, press the Minute Adjust button bt to adjust the minutes to the correct setting.