Pioneer DVR-310 operating instructions Additional information About DV, DV-related messages

Page 88

13Additional information

About DV

Using DV, also known as i.LINK, you can connect a DV- equipped camcorder to this recorder using a single DV cable for input and output of audio, video, data and control signals.

The i.LINK interface is also known as IEEE 1394-1995. “i.LINK” and the “i.LINK” logo are trademarks.

This recorder is only compatible with DV-format (DVC-SD) camcorders. Digital satellite tuners and Digital VHS video recorders are not compatible.

You cannot connect more than one DV camcorder at a time to this recorder.

You cannot control this recorder from external equipment connected via the DV IN/OUT jack.

It may not always be possible to control the connected camcorder via the DV IN/OUT jack.

This recorder only outputs DVD playback video from the DV IN/OUT jack; signals from the built-in TV tuner, CD, Video CD and other inputs are not output.

Copy-protected or copy-once DVD video is not output from the DV IN/OUT jack.

Digital camcorders can usually record audio as stereo 16-bit/48kHz, or twin stereo tracks of 12-bit/ 32kHz. This recorder can only record one stereo audio track. Set the DV Input setting as required (see DV Input on page 75).

Audio output from the DV IN/OUT jack is 16-bit only.

Audio input to the DV IN/OUT jack should be 32 or 48kHz (not 44.1kHz).

Picture disturbance in the recording may occur if the source component pauses playback or plays an unrecorded section of tape, or if the power fails in the source component, or the DV cable becomes disconnected.

DV-related messages

You may see the following messages appear on your TV screen when using the DV IN/OUT jack.

No DV camcorder connected. – The camcorder is not connected properly, or the camcorder is switched off.

The DV camcorder is recording. – The camcorder is recording, so you cannot start recording from the camcorder to this recorder.

You cannot connect more than one DV camcorder at the same time. – The DV jack on this recorder supports connection to just one camcorder.

No tape in the DV camcorder. – There is no cassette loaded into the connected equipment.

The DV camcorder is recording or is record- paused. – The camcorder is either in camcorder mode or record-pause mode. Put it into VTR mode.

DV camcorder playback canceled. Recording has been paused. – Recording was paused because the camcorder is not in playback mode.

Cannot operate the DV camcorder. – This recorder cannot control the camcorder. Try switching off the camcorder then switching it back on.

Could not operate the DV camcorder. – This recorder was not able to control the camcorder.

Recording has stopped because the recorded material on the tape finished. – When the recorded part of the DV tape comes to an end, this recorder automatically stops recording.

Recording has stopped because DV camcorder playback stopped. – Recording stopped because DV camcorder playback was stopped or the camcorder was disconnected.

88

En

Image 88
Contents DVR-310 Important Notice Page Contents Initial Setup menu Resetting the recorderSetting up the remote to control your TV Additional informationBefore you start FeaturesBefore you start Chapter Before you start Using the remote control Putting the batteries in the remote controlBefore you start What’s in the box General disc compatibility DVD-R/RW compatibilityCD-R/RW compatibility WMA Windows Media Audio compatibilityJpeg file compatibility File format used by digital still camerasOriginal Connecting up Connecting up ChapterRear panel connections Front panel connectionsConnecting up Easy connections OUTConnecting using an S-video output Connecting up Using other types of video outputConnecting using the component video output This enables you to watch the output from this recorder This enables you to watch and record TV channelsConnect RF antenna cables as shown This enables you to watch discs Connecting up Connecting to an AV amplifier This enables you to listen to multichannel surround soundConnecting up Connecting other AV sources Connecting a VCR or analog camcorderConnecting a DV camcorder PluggingControls and displays Chapter Controls and displaysFront panel Controls and displays Display RECREM FineControls and displays Remote control ReturnREV Scan / FWD Scan CM SkipControls and displays Prev / NextGetting started Switching on and setting upGetting started Chapter Getting started Other settings you can make Connected, or Not Connected, then press EnterDigital, Dolby Digital, DTS or PCM only, then press EnterUsing the built-in TV tuner Getting started Making your first recordingPlaying back your recording Changing TV channelsBasic playback Changing audio channelsPlaying DVD discs Playing CDs and WMA/MP3 discsPlaying Video CDs Using the Home MenuHome menu options Stop display Getting started Displaying disc information on- screenPlay display Copy protected material ! / PureCinema indicator # Recording modeRecording display Remaining recording time availableUsing the Disc Navigator to browse the contents of a disc PlaybackPlayback Chapter IntroductionUsing the Disc Navigator with recordable discs PlaybackChanging the thumbnail picture for a title Select ‘Play’ from the menu options UseUsing the front panel controls Playback Navigating discsOptionally Press Enter Use the Function button to select one of the followingPlayback Scanning discs Playing in slow motionScan 2 Scan 3 Scan ScanFrame advance/frame reverse PressForward playback During playback, press PauseSearch Mode Playback Play Mode menuPlay Mode Repeat play RepeatAt the point you want the loop to start, press Program play Other Program play functionsRepeat to build up a program list Start Program Play Starts playback of a saved program listSwitching DVD soundtracks Displaying and switching subtitlesClear Playback Switching the audio channel Switching camera anglesTo display/switch the audio channel, press Audio repeatedly To switch the camera angle, press AngleRecording Recording ChapterAbout DVD recording Recording time and picture qualitySetting the picture quality/recording time Press REC Mode repeatedly to select a recording settingRecording Recording equipment and copyrightRecording Basic recording from the TV Load a recordable discFront panel display shows the channel number To stop the recording, press Stop RECRecording Setting a timer recording Easy timer recordingPress Easy Timer 12/13 WEDStandard timer recording 12/13 WED 1145 AMUse Cursor to the recording end time on the gridTimer recording using the VCR Plus+ programming system Enter the timer recording settingsTo exit the timer recording screen, press Home Menu Press ‘VCR Plus+’ to display the VCR Plus+ program screenStopping or extending a timer recording in progress VCR Plus+ programming with the power offUS Code Simultaneous recording and playback Timer recording FAQUnlock Set up the recorder Press REC when you’re ready to start recordingRecording Recording from an external component Automatic recording from a satellite tunerRecording from a DV camcorder Also, set the camcorder to VTR modePress Home Menu and select ‘DV Record’ from the menu Recording from the DV output Playing your recordings on other DVD playersFinalizing a disc ‘Start Rec’ and press EnterFor Video mode discs only, select a title menu style Press Home Menu and select ‘Disc Setup’ Select ‘Initialize’Initializing a DVD-RW disc Select ‘Finalize’ from the finalize options, then ‘Start’Editing Chapter EditingDisc Navigator screen Editing Playlist / Original indicatorDisc Navigator menu options Editing Editing VR mode Original and Video mode content PlayErase Title Name Ttl NameChapter Edit Chpt Edit Using the remote key shortcuts to input a nameKey Characters Inserting chapter markers into a title Lock / UnlockCreating and editing a VR mode Play List Erase AllUndo Select ‘Undo’ from the Disc Navigator menu optionsSelect ‘Ttl Name’ from the Disc Navigator Play You can give titles new names of up to 64 characters longList menu options New title appears in the updated Play List CreateMove Original title to put into the Play ListDivide CombineDisc History Using the Disc HistoryDisc History Chapter PhotoViewer PhotoViewer ChapterPlaying a slideshow Reloading files from a discZooming the screen PhotoViewerRotating the screen Disc Setup menu Disc Setup menu ChapterBasic settings Initialize settingsFinalize Disc Setup menu Finalize settingsUndo Finalize Video/Audio Adjust menu Video/Audio Adjust menu ChapterSetting the picture quality for TV and external inputs Choosing a presetVideo/Audio Adjust menu Setting the picture quality for disc playbackChange the setting Virtual SurroundAudio DRC DRC from ‘Off‘ to ‘Max’Initial Setup menu Initial Setup menu ChapterUsing the Initial Setup menu Clock SettingInitial Setup menu Tuner settingsManual CH Setting VCR Plus+ CH SettingInitial Setup menu Video Out settings Audio In settingsComponent Video Out External AudioAudio Out settings Language settings 96kHz PCM OutMpeg Out OSD LanguageDefault setting w/Subtitle Language Subtitle LanguageAuto Language DVD Menu LanguageRecording settings Selecting ‘Other’ languagesManual Recording Optimized RecPlayback settings Parental Lock Set Password Frame SearchSeamless Playback Parental LockParental Lock Change Level Parental Lock Change PasswordParental Lock Country Code Select by code number Press Angle IndicatorPress Enter to set the new Country code Resetting the recorder Setting up the remote to control yourUsing the TV remote control buttons Additional informationWhen viewing on a widescreen TV or monitor When viewing on a standard TV or monitorAdditional information Screen sizes and disc formats Additional information Troubleshooting Problem RemedyGeneral NavigatorAdditional information Additional information Frequently asked questions What kind of discs can I use for recording?Additional information About DV DV-related messagesAdditional information Manual recording modes Video modeLevel Additional information Language code list Country code listLanguage Language code letter, Language code Country, Country code, Country code letterMessage Cleaning the pickup lens Hints on installationAdditional information Handling discs Storing discsMoving the recorder GlossaryMpeg audio Mpeg videoOptical digital output PCM Pulse Code ModulationAdditional information Specifications TimerSupplied accessories TunerPage Page Index IndexPage Pioneer Corporation VRB1314-A
Related manuals
Manual 92 pages 13.68 Kb

DVR-310 specifications

The Pioneer DVR-7000, DVR-310, and DVR-330-S are remarkable devices in the realm of digital video recording technology. Each of these models presents its unique features, embodying the innovation and quality synonymous with the Pioneer brand.

The Pioneer DVR-7000 is a versatile and robust digital video recorder that has been well-regarded for its exceptional recording capabilities and user-friendly operation. One of its standout features is its ability to record in MPEG-2 format, ensuring high-quality video playback. The device supports both DVD-R and DVD-RW formats, allowing users to create, edit, and finalize their recordings with ease. With a built-in 80GB hard drive, the DVR-7000 offers significant storage space for users to save their favorite content. The intuitive interface makes it simple to navigate through recorded programs, set timers for future recordings, and access various playback options.

Moving to the DVR-310, this model focuses on providing a reliable user experience with enhanced recording and editing features. It supports progressive scan output, providing sharper images and better detail during playback. The DVR-310 also includes a one-touch recording feature, which simplifies the process of capturing shows. Compatible with DVD-R, DVD-RW, and DVD+RW formats, users can enjoy flexibility in the types of media they choose. Its versatile connectivity options, including HDMI output, allow for easy integration into any home theater setup.

The Pioneer DVR-330-S, designed with a sleek aesthetic, combines functionality with cutting-edge technology. Featuring an integrated tuner, it allows users to record and watch live TV without the need for an external device. The DVR-330-S supports dual-layer DVDs, which effectively doubles the storage capacity compared to standard DVDs—ideal for long recordings or high-definition content. One of its key innovations is the Time Slip feature, which lets viewers pause live TV and resume playback seamlessly. In addition, it boasts advanced editing features that enable users to trim and merge recordings effortlessly.

Collectively, the Pioneer DVR-7000, DVR-310, and DVR-330-S showcase the brand's commitment to quality, usability, and technological advancement in home entertainment. With their various capabilities, they cater to a wide range of user preferences, whether for basic recording needs or more sophisticated editing functionalities. These models have solidified Pioneer’s reputation as a leader in digital recording solutions, ensuring that entertainment remains an enjoyable experience for all users.