QUICK START GUIDE
STEP 1: CONNECTIONS
When this converter box is powered on, digital signals from the ANTENNA RF IN jack are converted to analog signals and output from the TV RF OUT jack or the VIDEO OUT jack.
When this converter box is in standby state, analog RF TV signals pass through the box and output from the TV RF OUT jack.
Option One: Using the RF Cable to Connect a TV
1.Connect an antenna cable to the RF IN terminal on the rear of the unit.
2.Use the RF cable (included) to connect the unit and TV/Monitor.
3.Use the AC adapter (included) to connect a suitable wall outlet. The supplied 9V adapter operates on AC
4.Turn on your TV and switch TV’s channel selection to CH3.
Note:
•If a local TV Station happens to broadcast on CH3, we recommend you switch the unit’s Output Channel to Channel 4 (and switch TV to CH4), following the instructions on Page 12.
Rear of TV
Option Two: Using the AV Cable to Connect a TV
1.Connect an antenna cable to the RF IN terminal on the rear of the unit.
2.Use the AV Cable (not included) to connect the unit and TV/Monitor.
3.Use the AC adapter (included) to connect a suitable wall outlet. The supplied 9V adapter operates on AC
4.Turn on your TV and follow the instructions included with it to select the “AV IN” function.
YELLOW
RED
WHITE
Rear of TV
YELLOW RED | WHITE |
- 4 -