Troubleshooting Guide

)

Bad Picture (snow, multiple images distortion,blurry)

No sound.

•	Check the	location		of the	antenna and adjust it if necessary.
•	Make sure	the	antenna cable is			connectedfirmly.
•	Make sure	all	input	cables	are	connectedfirmly.

•Increase the volume.

•Check whether the mute function has been activated on the Remote Control.

No picture orsound.

Coloredpatches of picture.

Panel function key does not respond correctly.

•	Make sure	the	unit is	plugged in and onturned.
•	Make sure	that	the ATV	modeselectedis .
•	Try a new	channel to		check for possibletroublestation.
•	Make sure	the	antenna	is connected properly.

•Increase the volume.

•Make sure the antenna or audio/video source device is working properly.

•	Make sure		all	cables are	firmlyconnected.
•	Check for		localinterference.
•	Make sure		there are no unshielded electrical devices nearby
	that	are	causinginterference.
•	Turn	the TV		off forminutes,30 then try againit.

•Under the influence of electrostaticphenomenon, the product may malfunction and requireusertopowerreset.

•Unplug and re-plug the AC powercod.

The	displaymonitor's	•	LED TV takes			inside lightenphosphor. It may	increase the
panel	goeshot.		temperature		of	the screen in occasionssome. It's	not defecta.
Unusual dots		•	Black	dots	and Bright points may appear		on scrtheenLED.
			This	is a	structural property of the LED		panel and is not a defe

Stripes on screen	• Adjust	the impulse phase may decrease	stripesRGB. in
The top of the monitor• It may		occur duringlong-time working. It's not	a defect.
gets hot .

Unable to select a certain channel.

Disorder display at power on.

•The channel may be skipped. Choose this channel by directly selecting the buttons from the remote control.

• This may be caused because of avery short interval between POWER OFF and ON.

•Unplug the power and restart.