LA Audio Electronic EQX20 Circuit Description, Audio Path, Filter, Equaliser, Output

Page 17

6.0 CIRCUIT DESCRIPTION

Audio input

Audio output

High pass filter

 

Equaliser

Bypass

Bypass

 

Clip

Fig: 6.0.1 Block diagram of the LA EQX20 showing the main signal paths

AUDIO PATH

The input signal first passes through the electronically balanced input stage which provides RF filtering and rejection of common mode noise signals. The signal then passes through the High pass filter and equalisation stages and is output via the ground compensated output amplifier.

FILTER

The filter section is a standard 2 pole, -12dB/octave high pass design optimised for minimum ripple in the pass band. The -3dB frequency for this filter is 75Hz.

EQUALISER

The equaliser section is based on a State Variable Filter which provides variable Gain, Frequency and Q with very little interaction between the controls. There are 3 stages in series for each channel.

OUTPUT

The output stage is a balanced impedance, ground sensing amplifier which provides level matching and a low impedance output. The outputs are also RFI protected.

MONO mode

In MONO mode the output of Channel 1, pre output stage is fed directly into the EQ section of Channel 2.

Signal is still output from Channel 1 but has not been affected by the EQ settings of Channel 2.

BYPASS and 75Hz filter switching is controlled by Channel 1, Channel 2's switches are disabled. Only one filter is used in this mode.

Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Dual 3 Band, Mono 6 Band Parametric Equaliser Version April Contents Introduction Power Requirements InstallationOperating Environment CE Standards and the LOW Voltage Directive LVDExternal Connections Signal LevelsGreen-and-Yellow Earth Blue Neutral Brown Live XLR Limitations WarrantyChannel Description of ControlsFrequency control Clip led Mono led Bypass switchApplications Setting up and using the EQX20Audio Sweetening and Precision Equalisation Instrument Boosting CuttingPage Special Effects Removing SUB-SONICSMaking a Compressor Frequency Conscious Enhancing the EQ on a Mixing Console Audio Path Circuit DescriptionFilter EqualiserPower Supply SpecificationsInputs Outputs

EQX20 specifications

The LA Audio Electronic EQX20 is a sophisticated dual-channel graphic equalizer designed for professionals in the audio industry. Known for its exceptional sound quality and versatility, the EQX20 has become a go-to tool for live sound engineers and studio professionals alike.

One of the main features of the EQX20 is its 20 bands of equalization across the 20Hz to 20kHz frequency spectrum. This extensive range allows users to make precise adjustments to the audio signal, shaping the sound to suit any environment or performance. With 3 different filter types—Shelf, Peak, and Notch—the EQX20 gives users complete control over their sound, enabling them to boost or cut frequencies with remarkable accuracy.

A standout characteristic of the EQX20 is its dual-channel operation, which enables simultaneous processing of two separate audio signals. This feature is essential for multitasking in live settings, allowing engineers to manage different sources without the need for multiple units. The intuitive layout of the EQX20 further enhances its usability, with clearly labeled controls and LED indicators for each frequency band, making adjustments quick and effortless even in complex situations.

The EQX20 utilizes high-quality components, contributing to its low noise and minimal distortion. This ensures that the integrity of the audio signal is maintained, which is crucial in professional environments where clarity and precision are paramount. The unit is also built with durability in mind, featuring a rugged chassis that can withstand the rigors of on-the-road use.

Another key technology implemented in the EQX20 is the inclusion of a bypass switch. This feature allows users to quickly compare the processed signal with the original audio, facilitating real-time adjustments and ensuring optimal sound quality.

Additionally, the EQX20's comprehensive metering provides valuable feedback on signal levels, allowing users to monitor their adjustments effectively. This is particularly beneficial during live performances, where quick and accurate sound control is essential.

Overall, the LA Audio Electronic EQX20 is a powerful tool for audio professionals seeking to enhance their sound mixing capabilities. With its precise equalization, dual-channel functionality, and robust design, the EQX20 stands out as an indispensable asset in any sound engineer’s toolkit.
Top Page Image Contents