RCA DRC8040N manual Advanced Audio Connection Information

Chapter 1: Connections and Setup

	INPUT	COMPONENT VIDEO OUT	S-VIDEO	OUTPUT
					DIGITAL
	VIDEO	Y			VIDEO AUDIO OUT	INPUT
	L		IN		L	CABLE/ANTENNA
AC IN		Pb
				AUDIO
	AUDIO				COAXIAL
PROG.			OUT
					R
SCAN	R	Pr
						OUTPUT
OFF	ON				OPTICAL
					CH3	CH4

DVD Recorder

		Consult the manual
OUTPUT AUDIO	DIGITAL	that came with your
L (left)		receiver to connect it
	AUDIO	properly.
and R (right)
	OUT

Advanced Audio Connection Information

Both Dolby Digital® and DTS® are audio formats used to record 5.1-channel audio signals onto the digital track of film (while the film is being made). Both of these formats provide up to six separate channels: left, right, center, left rear, right rear, and common subwoofer. The disc will play 5.1-channel sound only if you’ve connected a DTS or Dolby Digital receiver or decoder, and if the disc is encoded in the Dolby Digital or DTS format.

Please Read This Before Using the DIGITAL AUDIO Jack!

This unit’s digital audio output jack is designed for a connection to a Dolby Digital or DTS receiver or decoder. Older digital equipment may not be compatible with the Dolby Digital bitstream. Such a connection can create a high level of noise that may be harmful to your ears, and could damage headphones or speakers. It is important to choose the correct Digital Output setting in the System Options menu. For more information, go to page 46.

Connecting your DVD Recorder to an audio/video receiver

You’ll need to consult instructions that came with your audio video receiver in order to connect it properly. The information below provides general guidelines for the DVD recorder’s Audio Output Jacks.

For a basic connection, connect the left and right audio cables to your audio/video receiver and to the OUTPUT AUDIO L (left – white) and R (right – red) jacks on the back of your DVD recorder.

If you have a Dolby Digital or DTS receiver, connect an optical cable (SPDIF) to the DIGITAL AUDIO OUT jack on the DVD recorder and the Digital Audio Input jack on the receiver (cables not supplied with DVD recorder). You must also adjust the Digital Output setting (go to page 46 for information).

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

© 1992-1997 Dolby Laboratories, Inc. All rights reserved.

DTS is a registered trademark of Digital Home Theater Systems, Inc.

14 Graphics contained within this publication are for representation only.