Connections & Setup
Connecting the Device
This connection allows you to connect a device that has Y Pb Pr (component video) jacks, for example, a DVD player.
Component Video cables (Y Pb Pr) are color coded- Green, Blue and Red
Audio cables are color coded- Red= right audio; white= left audio
Using the example of a DVD player:
1.If necessary, connect your cable and/or antenna as described on page 5.
2.Connect your Y Pb Pr component video cables.
Connect three video cables or special Y Pb Pr cables to the Y Pb Pr jacks on the back of the TV and to the Y Pb Pr outputs on the DVD player. Y Pb Pr cables are colored green, blue and red. Just match the colors on the cables to the Y Pb Pr jacks.
3.Connect your audio cables.
Connect the audio (white and red) cables to the AUDIO R and L (COMPOSITE INPUT) jacks on the back of the TV and to the audio output jacks on the DVD player. Just match the colors.
Important - When using the Component video input (Y Pb Pr) jacks, use only the Audio R/L jacks from the COMPOSITE INPUT for this connection.
+•? ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
DIG•ANA
INPUT button
Viewing the Picture from the Connected Device
The device in this example, a DVD player, is connected to the TV’s Y Pb Pr jacks. To view the DVD player:
1.Turn on the TV and the DVD player.
2.Press the INPUT button on the remote control to toggle through the Video Input Channels until you see CVID displayed in the channel banner.
•To review other
connections, go to the next page.
• If you are done connecting devices to your TV, go to page 11 to complete the Initial Setup.
• If you want more details of the jacks on your TV, go to page 13.
Chapter 1 |