Using the TV’s Features
Autotuning
Go back |
|
Set VCR Channel | VID1... |
Set DVD Channel | CMP1... |
Set | HDMI1... |
5.Press the right arrow button to select the choice that matches the way you have the device connected to this TV.
You can select from the following inputs or channels:
Disabled Choose this if you don’t have a device connected to the TV, or if you don’t want the TV to automatically tune to the correct channel/input when you’re using this device.
Channel 3 or 4 Device is connected to the ANTENNA/CABLE jack on the back of the TV, and you want the TV to tune to channel
3 when you press the corresponding button on the remote. Reminder: make sure the device’s Channel 3/4 switch is set to channel 3.
VID1 or VID2 (Video Input) Device is connected to the VIDEO INPUT 1 jack on the back of the TV or the VIDEO INPUT 2 jack on the side of the TV and you want the TV to tune to the VIDEO input channel when you press the corresponding device button.
CMP1 or CMP2 (Component Video Input) Compatible component video source, such as an HDTV tuner or satellite receiver, is connected to the three COMPONENT VIDEO INPUT jacks (Y Pb Pr) on the back of the TV and you want the TV to tune to the component video input channel (CMP1 or CMP2) when you press the corresponding device button.
VGA Device is connected to the VGA jack on the back of the TV and you want the TV to tune to the VGA input channel when you press the corresponding device button
HDMI1 or HDMI2 Device is connected to the HDMI1/DVI or HDMI2 jack on the back of the TV and you want the TV to tune to the HDMI input channel when you press the corresponding device button.
28 | Chapter 3 |