RCA HDLP50W151 manual Digital or Analog TV Channels, Mpaa Not Rated

Using the TV’s Features

Digital or Analog TV Channels

A single off-air antenna can pick up both analog and digital channels. Digital channels can be made up of primary channels and subchannels.

Note: Subchannels (sometimes called minor channels) are channels associated with the Primary channel (sometimes called the major channel). A primary channel may have just one subchannel or multiple subchannels.

Primary	Subchannel
Channel	(if necessary)

Tip:

Use the channel banner to determine whether a channel is digital or analog. A digital (ATSC) channel has a dash and second number after it (e.g., 21-1); an analog channel doesn’t (e.g., Ch 21).

Ch6088- 2-888 WWWW	Antenna A (Air)
Listening to: English in SRS FOCUS	4:3 Normal 480i SD
MPAA - Not Rated

ON-OFF

TV

DVD VCR

SATCAB AUX AUDIO

PIP SWAP CH. CTRL SKIP

TV Button

1.Make sure the TV is in TV mode by pressing TV on the remote control.

2.Enter the primary channel number (up to three digits). This number appears in the primary channel entry box. Press OK or wait a few seconds. If you don’t enter a subchannel, the TV tunes to the lowest subchannel.

SOUND FREEZE VCR PLUS+ LIGHT

VCR+

FORMAT INFO

CLEARMENU

OK

GUIDE

	3.	If the primary channel number has fewer than three digits and you
		want to enter subchannel numbers, press the right arrow button to
		advance to the subchannel entry box.
Right Arrow	4.	Enter the number of the subchannel. This number appears in the
		subchannel entry box.
	5.	Press OK to tune to the channel or wait a few seconds.
		Notes:

Tip

If a digital and analog channel have the same primary channel number, tune to the analog channel by entering the analog channel number or entering the analog channel number and then a subchannel of “0.”

You can always use the channel up and down buttons on the remote control to change channels within the TV mode.

You may notice the size of the channel banner changes when you change channels. This is perfectly normal and occurs because analog (NTSC) broadcasts and digital (ATSC) broadcasts use different formats. Your HDTV can display both types and adjusts the picture accordingly.

If you wait too long before entering the subchannel, the TV tunes to the lowest subchannel.

Chapter 3 43