RCA M50WH187 manual How to Use the Remote After You’ve Programmed It, Using Manual Code Search

Page 24

Using the Remote Control

6.To test the code you’ve programmed for that device button, point the remote at the device and then press ON•OFF to see if the device responds to the remote control.

If the device turns off, you’ve entered the correct programming code for your device. Circle the code you entered for future reference.

If the device doesn’t turn off, repeat these steps until you’ve tested all codes for your device’s brand or try to run a manual code search.

Using Manual Code Search

Note: Before using manual code search, you must use Direct Entry first. This lets the remote know which type of device to begin searching codes. Then proceed with the following steps.

1.Turn on the device you want to control.

2.On your remote control, simultaneously press and hold the ON•OFF and MUTE buttons (approximately 3 seconds) until a device button remains lit. Then release the buttons.

3.Press and release the device button (SAT•CABLE, VCR, DVD, AUX or AUDIO) you want to program.

4.Repeatedly press and release the ON•OFF button, watching for the device to respond. If it does turn off, press and release the OK button within 3 seconds to save the code. If you accidentally passed the code before saving it, press the left arrow button to backtrack through the codes; then use the right arrow button to go forward through the codes again.

When all codes have been searched, the device button flashes 3 times, then the remote exits manual code search and returns to normal operation.

Using Automatic Code Search

1.Turn on the device you want to control.

2.On your remote control, simultaneously press and hold ON•OFF and MUTE (approximately 3 seconds) until a device button remains lit. Then release the buttons.

3.Press and release the device button you want to program.

4.Press and release the ON•OFF button once. There is a delay of approximately 6 seconds before the remote starts the code search.

The device buttons blinks each time the remote control sends a code to test with your device. Keep pointing the remote at the device.

5.Once the device turns off, quickly press the OK button to save the code. If you accidentally passed the code before saving it, press the left arrow button to backtrack through the codes; then use the right arrow button to go forward through the codes again.

When all codes have been searched, the device button flashes 3 times, then the remote exits automatic code search and returns to normal operation.

How to Use the Remote After You’ve Programmed It

Once the remote has been programmed successfully, you are ready to use it to operate your devices.

To Operate the Device:

•Press the appropriate device button (SAT•CABLE, VCR, DVD, AUX or AUDIO) to set the remote to control the device, for example, press DVD to control your DVD player.

•Press ON•OFF to turn the device ON or OFF.

Continues on next page...

22

Chapter 2

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Hdtv User’s Guide Important Information Product Registration Product InformationResolution Digital Signal and SoundIntroduction Thank You for Choosing RCAOther Key Features of Owning an RCA Hdtv Lamp ReplacementUser-friendly Features Help You Personalize Your TV Example Service Model Number sticker with lamp type listedTable of Contents Using the TV’s Menu System Other InformationThings to Consider Before You Connect Connections & Setup Get the PictureGetting Cable Channels Getting Digital ChannelsUsing the CableCARD Slot Setting Up Digital Cable Television ServiceChoose Your Connection Jacks Used Cables Needed Go toPages Connecting the Device Pb Pr Component Video ConnectionViewing the Picture from the Connected Device Audio/Video Connection CompositeHdmi Connection Connecting Your TV to an Audio/Video Receiver Advanced Audio Connection InformationSetting Up Your TV Remote Control Buttons Used for the Assisted SetupComplete the Assisted Setup Connecting Your TV to a Receiver with Dolby DigitalChoose Setup Options Set the Menu LanguageComplete the Channel Search What To Expect Next StepsWatching TV Changing ChannelsExplanation of Jacks FIXED/VARIABLE Audio Outputs Front of Your TV Front/Side Input JacksFront Panel Using the Remote Control Buttons on the Remote ControlUsing the Remote Control Using Direct Entry Programming the Remote to Operate Other DevicesFind Out If You Need to Program the Remote Programming the RemoteHow to Use the Remote After You’ve Programmed It Using Manual Code SearchUsing Automatic Code Search Volume Punchthrough Feature Modes of OperationUsing the Input Button Remote Code ListDeleting ALL Volume Punchthrough Commands Audio CodesDVD DVD/VCR Combo Codes DVR/DVD CombosDVR Codes DVR/Cable CombosWeb TV ShintomThis page left intentionally blank Using the TV’s Features About the Channel BannerUsing the TV’s Features Direct Tuning to a ChannelDigital or Analog TV Channels Getting a Program DescriptionParental Controls How V-Chip Works for the USA and CanadaLock/Unlock TV USA V-Chip TV Ratings Blocking Age-Based RatingsHierarchy of Age-Based Ratings Blocking Specific Content Themes Content ThemesChip Movie Rating Limit Blocking Movie RatingsCanada V-Chip Chip Unrated Program BlockFront Button Block Auto Tuning Feature Editing Channels in the Channel ListsFuture Downloadable Ratings Menus, On-screen Help, and Control Panels Navigating the Menu SystemOn-Screen Help ControlsUsing the TV’s Menu System Picture Preset Mode Picture SettingsPicture Menu Go Back Picture Preset Mode Picture Settings Advanced Picture Screen AdjustScreen Format Advanced Picture MenuScreen Adjust Menu Screen AdjustSound Preset Mode Audio MenuSound Logic BalanceAudio Lang./Mode Go Back Sound Expansion Audio Lang./ModeChannel Setup Menu Startup Volume Maximum VolumeDigital Audio Out DVI Audio Input Go Back Picture Menu Audio MenuAdvanced Settings Go Back Signal StrengthSignal Source Auto Tuning Special Features Channel SearchSetup Options Menu Closed CaptioningQuick Startup Caption DisplayAnalog Captions Digital CaptionsCaption Style Go Back Caption DisplayAssisted Setup Time MenuMenu Preferences Advanced OptionsFrequently Asked Questions FAQs Other InformationTroubleshooting Other InformationBlank screen Unusual sound qualityHumming or buzzing noise No picture, sound okayNoisy stereo reception No picture, no sound but TV is onSound okay, picture poor Black box appears on the screenDon’t remember my password and I want to unlock the TV Lamp Replacement Information Service Model Number Sticker location with Lamp TypeReplacing the Lamp Unit Hdtv Specifications NTSC/ATSC/64 QAM/256 QAMLimited Warranty For how long after your purchaseCare and Cleaning FCC InformationThis page left intentionally blank This page left intentionally blank This page left intentionally blank This page left intentionally blank TTE Technology, Inc Tocom 1666047A

M50WH187 specifications

The RCA M50WH187 is a versatile and feature-rich smart TV that caters to the entertainment needs of modern households. With a stunning 50-inch display, this television offers a perfect blend of size and technology, ensuring that viewers enjoy a cinematic experience from the comfort of their living rooms.

One of the standout features of the RCA M50WH187 is its 4K UHD resolution. This technology provides four times the resolution of Full HD, delivering crystal-clear images and vibrant colors that enhance movie watching, gaming, and streaming experiences. The high pixel density makes every detail pop, whether you are watching your favorite shows or playing fast-paced video games.

Equipped with Smart TV capabilities, the RCA M50WH187 offers access to a wide range of streaming services such as Netflix, Hulu, Amazon Prime Video, and more. Users can enjoy an extensive library of content without the need for additional devices. The TV runs on a user-friendly platform that allows for easy navigation, and it includes built-in Wi-Fi, making it convenient to connect to the internet.

The RCA M50WH187 also supports HDR (High Dynamic Range) technology, which enhances the contrast and color accuracy of the displayed images. This means that viewers can experience a broader range of colors and improved details in both the brightest and darkest scenes, contributing to a more immersive viewing experience.

For audio, the RCA M50WH187 is equipped with built-in speakers that deliver clear and well-balanced sound. However, for those seeking a more cinematic auditory experience, the TV features multiple HDMI ports, allowing users to connect external sound systems or soundbars easily.

In terms of design, the RCA M50WH187 boasts a sleek and modern aesthetic with thin bezels, making it a stylish addition to any home decor. Its lightweight design also allows for easy wall mounting or placement on a TV stand.

In conclusion, the RCA M50WH187 is a well-rounded smart TV that excels in display quality, connectivity options, and user-friendly features. With its advanced technologies and characteristics, it ensures that users can enjoy their favorite content in high definition, making it an excellent choice for families and entertainment enthusiasts alike.
Top Page Image Contents