RCA RLED4664A manual Instruction for Wall Mount

Page 9

Introduction

3. Instruction for Wall Mount

A wall mount kit (purchased separately) would allow you to mount your RCA TV on the wall. For detailed information on installing the wall mount, refer

to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. RCA is not responsible for any damage to the product or injury to yourself or others resulting from the wall-mounting.

Dimensions for Mounting Hole Pattern

400mm

400mm

-This RCA TV is compatible with a 400mm x 400mm mounting hole pattern.

-4 pcs of type MB6 screws are required for installing the wall mount bracket to your RCA TV. Do not use screws that are longer than 12 mm. Screws that are too long may cause damage to the inside of the TV set.

-Do not fasten the screws too tight for this may damage the TV or cause the TV to fall, resulting in personal injury. RCA is not liable for these kinds of incidents

-Do not mount your RCA TV at more than a 15 degree tilt.

-Always use two people to mount the TV to a wall.

-Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

7

Image 9
Contents 46 1080p LED Television Page Contents Correct disposal of this Product Physical safety Electrical safetyProduct Feature Front View IntroductionRear View Instruction for Wall Mount Remote Control Installing Batteries Basic Operation Picture menu Picture Settings PressOSD Menu Sound Settings Press Equalizer Settings PressSound menu Channel menu TV Rating Use Parental Control menuOSD Menu Setup menu Closed Caption PressClock Press Others menu TV does not respond to remote control No powerNo picture or sound Poor picture quality46LED TV