Connections & Setup
Tips
If you’re not sure which channel is the cable box’s output channel, consult the owner’s manual that came with your cable box or contact your cable company.
Leave your cable box turned ON to receive program information.
Leave your VCR turned OFF to record programs.
6.Look at your cable box. If it is still on and changed to channel 09, the test was successful. Highlight Yes, and press OK.
If the cable box did not change to channel 9, highlight No. If you select No, the system will try another code.
If the GUIDE Plus+ system cannot recognize your cable box after several tries, a screen stating “Cable Box (VCR) test failed...Please consult your manual and try again” appears. You have a choice to either Try Again or Skip Cable Box Setup. If you get this message, you should also:
•Double check the brand of your cable box, and try entering it again.
•Check to make sure the
If you choose to skip the cable box or VCR setup some features of the guide may not be available until you successfully complete this procedure.
7.Highlight the channel to which you have to tune your TV in order to see cable programming, and press OK (a screen appears reminding you to connect your
Notes:
•Channel 03 is the most common.
•Choose Video1/AUX if your cable box is connected to your TV with audio/video cables instead of a coaxial cable. Go to page 13 for pictures of these cables.
Chapter 1 | 21 |