OSD Menu
OSD Menu
1. Picture menu
Description
Picture Settings: Press | button to enter the Picture Settings menu. |
Picture mode: Select between Dynamic, Standard, Movie, User and Power Saving.
You may select the picture mode directly by pressing the PICTURE button on the remote control.
Note: when select the "Power Saving", the machine is in
Brightness: Adjust brightness of the picture.
Contrast: Control the difference between the bright and
dark regions of the screen picture. Color: Adjust color of the picture.
Tint: Control the fresh tones to make them appear natural.
Sharpness: Set the amount of fine detail in the picture.
Screen Size: Select the displaying mode of the picture between Wide, Cinema, Zoom, Normal just scan.
PC Settings: If the video input signal comes from your PC, you may adjust the Vertical Position, Horizontal Position, Clock, Phase or even perform an Auto adjustment.
Auto Adjust: Press OK button to setup the parameter of the screen automatically.
Clock: Adjust the pixel clock frequency, until the image size is maximized for the screen.
H/V Position: Adjust the transverse/vertical position of the screen.
Phase: Adjust the phase of the ADC sampling clock relative to the sync signal, until a stable image is obtained. Reset: Press OK button to reset the settings.
Color Temp.: Select between Normal, Cool and Warm.
12