Connecting the Power Cord

CONNECTIONS

CONNECTING A PC

Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable and an audio cable (not included) as shown.

Make sure you connect the cable from the computer (VGA and AUDIO - PC OUT ) to this unit

(VGA and AUDIO - PC IN ).

TO AUDIO OUT jacks

TO PC Connector

You can power your TV unit by plugging the power cord into the AC socket on the rear of

the unit and into a wall AC power outlet. Check that the rated voltage of your unit matches your local voltage. Make sure that the power cord is fully inser ted into the unit.

NOTE

•Insert the power plug fully into the socket outlet.

(If the power plug is loose , it could generate heat and cause fire .)

•Ensure that the power plug is easily accessible.

•Ensure the earth pin on the power plug is securely

connected to prevent electrical shock.

•Do not touch the power plug with a wet hand. (This may cause electrical shock.)

•Do not use any power cord other than that provided with this TV. ( This may cause fire or electrical shock.)

•Do not damage the power cord.

(A damaged cord may cause fire or electrical shock ).

• Do not move the TV with the cord plugged in the socket outlet.

• Do not place a heavy object on the cord or place the cord near a high-temperature object.

•Do not twist the cord, bend it excessively, or stretch it.

•Do not pull on the cord. Hold onto the power plug body when disconnecting cord.

•Do not use a damaged power plug or socket outlet.