Emergency Alert System EAS, PIP Problems?

Using the TV’s Features

2.Use the channel up and down, INPUT, ANT•CAB, or number buttons, or component buttons that have been auto tuned, to change the PIP channel.

3.To change the program in the main picture window, press CH CTRL. Then use any of the above mentioned buttons. To go back and forth between controlling the PIP window and the main picture, press the CH CTRL button.

	Program Title/Acquiring Channel				00:30 12:30 AM 12:39 PM
Main picture		Ch 8-1 WLPJ			Antenna Input
Main picture		Ch 8-1 WLPJ			Antenna Input
channel		Listening to Stereo			4:3 Normal 480i SD
number				MPAA - Not Rated
number

Channel		PIP Ch	8	Unrated	Cable Input
Channel		PIP Ch	8	Unrated	Cable Input
control
indicator

PIP channel number

PIP Problems?

•If you are channel surfing in the main window and PIP disappears, you may have tuned to a digital channel. To view PIP and the main picture, make sure that both the main and PIP channels are analog inputs, or signals. Continue changing the channel until you find an analog (NTSC format) channel. The PIP window will reappear.

Program Title/Acquiring Channel		00:30 12:30 AM 12:39 PM
Ch 8-1 WLPJ		Antenna Input
Listening to Stereo		4:3 Normal 480i SD
	MPAA - Not Rated

PIP Not Viewable		Cable Input

The message “PIP Not Viewable” in the channel banner lets you know that PIP is not available on this channel and you should tune to another channel.

•If you press PIP and the PIP window is gray, you may have activated the Parental Control feature and the program exceeds the rating limits you set. For information on removing limits, see the section “Parental Controls.”

•Closed captioning is not viewable in the PIP window.

•PIP channel skips all digital (ATSC) TV channels and tunes to analog channels.

•PIP can only be displayed in analog signals from CABLE, ANTENNA, composite, S-VIDEO and component (Y, Pb, Pr) inputs in 480i format.

Emergency Alert System (EAS)

The EAS works only if you have a digital cable card connected to the CableCARD slot on the back of the TV. Your cable company informs you of emergency alert information related to your state or local-level emergencies, such as Flash Flood Warnings, Severe Thunderstorm Warnings, and Tornado Watches. When your TV receives a state or local-level emergency, a message is displayed that lasts approximately 2 minutes, but can be repeated if necessary. During this time, you can’t clear the information being displayed. In the rare event that there is an national-level emergency, your TV would tune to a channel broadcasting the emergency information.

Chapter 3