Picture Audio Setting Function Window

Basic operation (to be continued)

2.Window

This TV supports no higher than 60Hz under PC mode, so please set the refresh rate of PC to 60Hz. If the frequency is higher than 60Hz, the screen may flicker. When the TV is in PC mode, press MENU button on the remote control. Press t/u Arrow button to select “WINDOW”.

PICTURE

AUDIO

SETTING

FUNCTION WINDOW

PICTURE

AUDIO

SETTING

FUNCTION WINDOW

H-POSITION

100

H-POSITION

100

V-POSITION

100

V-POSITION

100

CLOCK

100

PHASE

AUTOADJUST

ADJUST

SELECT

EXIT

ADJUST

SELECT

EXIT

1)Adjusting picture H-Position

Press q/p Arrow button to select “H-POSITION” and press t/u Arrow button to set horizontal position of picture.

2)Adjusting picture V-Position

Press q/p Arrow button to select “V-POSITION” and press t/u Arrow button to set vertical position of picture.

3)Adjusting Clock

When PC is connected to TV set because of the difference of PC parameter,you should adjust the “CLOCK” item in “WINDOW” menu until you get a good picture.

4)Adjusting Phase

When PC is connected to TV set because of the difference of PC parameter,you should adjust the “PHASE” item in “WINDOW” menu until you get a good picture.

5)Auto Adjust

If there are unexpected problems happened when you adjust the items, you can select the “AUTO ADJUST” and press u Arrow button, the TV set will resume the original settings.

Note: Only “H-Position” and “V-Position” are available for YPBPR mode.