Using the TV’s Features
Sample displays on a Channel Banner.
Channel Banner
There are several indicators that might appear when you press the TV or INFO buttons on the remote. This display is called the Channel Banner. The following list describes the items on the Channel Banner screen (left to right and top to bottom).
4/3 format | Displays the current screen format. |
Mono | Mono displayed when the current channel is broadcasting in mono. |
(or Stereo) | Stereo displayed when the current channel is broadcasting in stereo. |
SAP | Displayed when the current channel is broadcasting SAP (Second Audio |
| Program) information. |
| Displayed when the Parental Controls are locked. |
CCDisplayed when Closed Captioning is available on the current channel.
03:45 pm Displays the current time.
15 NBC | Displays the current channel and label assigned to the channel. |
Commercial Displayed to count time remaining on the commercial skip (SKIP) timer. skip 0:30
Displayed when you mute the sound.
VCR1TV
DVD VCR2 AUX SAT CABLE
Why You Should Use the Autotuning Feature
The autotuning feature automatically tunes the TV to the correct channel for different components you have connected to your TV (like a VCR, DVD Player, etc.) When you set up autotuning in the menu system you don’t have to remember to change your TV to channel 3, for example, when you want to watch the tape in your VCR.
How to Set Up the Autotuning Feature
With the autotuning feature, you can set up the TV to tune to the channel you need to watch by pressing that component’s button.
1. Press MENU (the MAIN MENU appears).
The way you set up the autotuning feature in the TV’s menu corresponds to the component buttons on the remote and the way you have each component connected to your TV. When you set up autotuning, you’re telling the TV what channel to tune to when you press the VCR1, VCR2, DVD, or SAT•CABLE button on the remote control.
2.Highlight Setup and press OK on your remote control.
3.Highlight Autotuning and press OK.
4.Choose which channel you would like to set:
Set VCR 1 Channel Lets you set up the channel the TV tunes to when you press the VCR1 button. Set VCR 2 Channel Lets you set up the channel the TV tunes to when you press the VCR2 button. Set DVD Channel Lets you set up the channel the TV tunes to when you press the DVD button.
Set SAT/Cable Channel Lets you set up the channel the TV tunes to when you press the SAT•CABLE button on an RCA satellite receiver remote. (The RCA DTC100 HD receiver is considered a satellite device and can be set up for autotuning using this channel.)
5.Press the right arrow button to select the choice that matches the way you have the component connected to this TV, and press OK.
The choices and a brief explanation follow:
N/A Choose this if you don’t have this particular component connected to the TV, or if you don’t want the TV to automatically tune to the correct channel when you’re using this component.
Channel 3 or 4 Component is connected to the CABLE/ANTENNA jack on the back of the TV, and you want the TV to tune to channel 3 when you press the corresponding button on the remote. Reminder: make sure the component’s Channel 3/4 switch is set to channel 3.
VID1 or VID2 (Video Input) Component is connected to a VIDEO or
FRNT (Front Video Input) Component is connected to the VIDEO jack on the front of the TV and you want the TV to tune to the front VID input channel (FRNT) when you press the corresponding button.
Chapter 3 | Graphics contained within this publication are for representation only. | 17 |