RCA D40W15B manual Changing Lists and Labels, Auto Convergence

Page 19

Connections & Setup

Note:

If you're using an HD source (such as an HDTV tuner or HDTV satellite receiver) on the CMPNT or DVI input, you should run Auto convergence separately for that input as well. Tune to the input you're using for the HD source, then go to page 38 for information on Auto convergence.

Changing Lists and Labels

The List & Labels part of the setup lets you edit your channel list and choose or create a personal six-character label for each channel.

Note: Changing List and Labels can be time consuming. You can change these at a later time by accessing the Setup menu.

1.Press the left or right arrow to scroll through the channels and choose the one you want to edit.

2.Press the down arrow to highlight the In channel list option. Press the left or right arrow button to add (the box is checked) or remove (the box is unchecked) the channel from the list.

3.Press the down arrow to highlight the Channel label option. Press the left or right arrow button to scroll through the available list of 25 most common labels. The last option in the list allows you to create your own six- character label for the channel (the first letter of the label is highlighted).

4.Press the 1 or 2 number button to change the first letter of the label.

5.Press the right arrow to highlight the second letter, then press the 1 or 2 number button to change the second letter, etc...

6.When you are finished creating your label, press OK. Select Go back to go to the Auto Convergence menu.

Auto Convergence

Your TV’s picture tubes might have been disturbed during delivery or after you moved the TV, causing the color in your TV to be out of alignment. The colors adjust by starting auto convergence.

IMPORTANT: Auto convergence works best once the TV has warmed up for at least an hour. If you've just unpacked your TV, it's a good idea to repeat the Auto convergence function when the TV's been running for at least an hour. See page 38 for more information about Auto convergence.

1.Press OK to begin auto convergence.

2.When the auto convergence is complete, the Red center convergence menu appears. The cross in the middle of the screen should be yellow. If it is not, use the arrow buttons to move the red cross to overlap the green cross.

Press OK when adjustments are complete.

3.The Blue center convergence menu appears with a cyan cross in the middle of the screen. If it is not, use the arrow buttons to move the blue cross

to overlap the green cross. Press OK (the TV tunes to the last selected/ available channel in the channel list).

Chapter 1

Graphics contained within this publication are for representation only.

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Changing Entertainment. Again Hdtv Monitor User’s GuideProduct Registration Product Information Important InformationImportant Safety Instructions Introduction Key Features OverviewTable of Contents Things to Consider Before You Connect Connections & SetupCables Connection Go to Needed Title Choose Your ConnectionCables Needed to Connect Components to Your TV ComponentsHdtv DVD VCR Go to TV + Hdtv Tuner + VCR + DVD PlayerSatellite Make sure cable or antenna is connected to your VCR TV + Satellite Receiver + VCR2B 2A TV + DVD + VCR TV+ A/V Receiver or Speakers Explanation of Jacks in alphabetical order Front Input Jacks Front of Your TVFront Panel Buttons How to Use the Remote Control to Complete the Initial SetupPlug in the TV Put batteries in the remoteComplete Auto Channel Search Complete the Initial SetupTurn on the TV Set the Menu LanguageAuto Convergence Changing Lists and LabelsButtons on the Remote Control Using the Remote ControlTip Programming the Remote Using Automatic Code SearchProgramming the Remote to Operate Other Components Find Out If You Need to Program the RemoteUsing Direct Entry Using the Input Button How to Use the Remote After You’ve Programmed ItVCR Codes Remote Control CodesChannel Banner Using the TV’s FeaturesAutotuning Why You Should Use the Autotuning FeatureHow to Set Up the Autotuning Feature How V-Chip Works for USA and Canada Parental Controls and V-ChipUS V-Chip TV Rating Limit V-Chip Rating Screen USA Description and Content Themes for Age-Based RatingsBlocking Age-Based Ratings Blocking Specific Content ThemesViewing Age-Based Ratings Canada V-Chip Ratings Canadian French V-Chip Rating System Blocking Canadian V-Chip RatingsFront Panel Block Chip Movie Rating LimitBlocking Unrated/Exempt Programs Lock/Unlock Parental ControlsPIP and POP Buttons Sound Menu Using the TV’s Menu SystemPicture Menu Advanced picture settingsUsing the TV’s Menu System Time Menu Channel Guide MenuParental Control Menu PIP Menu Setup MenuShort-term vs. Long-term Power Outages Other Information TroubleshootingRemote Control Doesn’t Work FCC Information Care and CleaningRCA Hdtv Monitor Limited Warranty How State Law relates to warranty Limitation of WarrantyIf you purchased your unit outside the United States HOW to Order Accessory InformationDVD IndexThomson Inc
Top Page Image Contents