Connections & Setup
4. Connect your HD Receiver to your TV.
A. Connect the supplied high resolution cable to your HD receiver and to the HIGH RESOLUTION INPUT on the TV.
Note: Due to copyright restrictions, you may not be able to view some high definition programs in high definition format using this product. To view material in standard definition instead, you also must connect the Audio/Video jacks to the TV.
B. Connect audio/video cables from the HD receiver’s AUDIO OUT (R and L) and VIDEO jacks to the INPUT2 AUDIO and VIDEO IN jacks on the TV.
C. Connect audio cables from the HD receiver’s AUDIO OUT (R and L) jacks to the TV’s HIGH RESOLUTION AUDIO IN (R and L) jacks.
D. Connect an optional
Note: If you are using an
Viewing the Components
1.Turn on the TV and the component(s) you want to view.
2.Press the TV button on the remote control.
3.Press the INPUT button on the remote control to scroll through the video inputs.
•The VCR can be viewed on the VID1 input channel.
•The HD receiver can be viewed on the HiRes (recommended) or VID2 input channel.
•The DVD player can be viewed on the VID3 input channel.
Notes:
•You can set up the TV to automatically tune to the correct input channel. This is called Autotuning. (See Chapter 3 for more information.)
•The TV automatically detects when a component is connected to the HIGH RESOLUTION INPUT jack. To connect a component video device to this jack, you need to use the supplied
Important: If your RCA or PROSCAN HD receiver switches from a high definition output to a standard definition output, you will need to switch from the high resolution input channel to the standard definition INPUT2 (VID2) channel in order for you to view the signal. There are two situations in which this would occur:
•When recording from the HD receiver
•When a high definition output signal is not allowed by the program provider and/or movie studio for that particular program
Go to page 15
Chapter 1 | 9 |