Using the TV’s Menu System
0 Go Back
1 Equalizer Presets
2 Audio Processor
3 Sound Logic
4 Audio Mode
5SAP
6Balance
7 Audio Connections
Main Menu 
Audio
Select a default for NTSC (analog) sources:
Mono
Stereo
Select a default for sound expansion:
Off
SRS
SRS TruSurround XT
SRS FOCUS
A change in this screen is applied to all inputs.
Press or to point to an option, then press OK to select it. Press to return to the menu.
Audio Processor
The Audio Processor displays a choice list of available audio modes, which control the way the sound comes through your speakers when TV is set to using the Variable Output. The selected setting affects all inputs and tuners.
To create the settings:
1.Press the MENU button to access the main menu.
2.Select Audio, and then Audio Processor. The following options appear:
Mono Plays the sound in monophonic audio only. This should only be used when the stereo signal is weak. The channel banner displays the word Mono when you have selected Mono and SRS is turned off.
Stereo Splits the incoming stereo audio signal into left and right front channels. Most TV programs and recorded materials have stereo audio. The channel banner displays the word Stereo when you have selected Stereo and SRS is turned off.
The following options are available only if the Fixed/Variable Output is set to Variable:
Off No SRS processing is applied to the audio.
Adds greater depth and stereo separation to stereo audio signals. Delivers a panoramic 3D sound stage from stereo material. Use the SRS FOCUS adjustment on the right to adjust the clarity.
Creates a virtual surround sound from multichannel source material through any
0 Go Back
1 Equalizer Presets
2 Audio Processor
3 Sound Logic
4 Audio Mode
5SAP
6Balance
7 Audio Connections
Main Menu 
Audio
Off
On
Turning Sound Logic on will monitor a program's audio track and limit volume excursions to a minimum and maximum volume range from the current volume setting. Acting like a dynamic range limiter, it compresses the dynamic range to limit sudden volume increases (for example, the sudden increase in volume you sometimes hear when a commercial starts).
A change in this screen is applied to all inputs.
Press or to point to an option, then press OK to select it. Press to return to the menu.
Sound Logic
Acting like a dynamic range limiter, it compresses the dynamic range to limit suggested volume increases (for example, the sudden increase in volume you sometimes hear when a commercial starts). Choose On or Off, depending on your preference.
TruSurround XT, SRS and (
) symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.
60 | Chapter 4 |