Philips FW-C72 22RECORDING Clock, CD Synchro Start Recording, One Touch Recording, View Clock

22RECORDING

CLOCK

4Press DUB (HSD) once for normal speed dubbing or twice (within 2 seconds) for high speed dubbing.

ª“NORMAL” (normal speed) or “FAST” (high speed) will be displayed, followed by “DUB“ with “< or >” scrolling left or right depending on the tape side selected.

ªThe HSD appears on the display during high speed dubbing.

•Dubbing will start immediately. ª The REC starts flashing.

5Press ‚ to stop dubbing.

CD Synchro Start

Recording

1Load a blank tape into tape deck 2 and a disc into a disc tray.

2Press CD to select CD mode.

•You can program the tracks in the order you want them to be recorded (see Programming Tracks). If not, select the disc by pressing CD

(CD 1•2•3) and the tracks are recorded according to the order on the selected disc.

3Press REC to start recording. ª The REC starts flashing.

MINI HIFI SYSTEM	PROGRAM SHUFFLE				STEREO		C
	REPEAT TIMER REC				BACK
	NEWS T.A. AM MW FMLW				FRONT HSD	L	R
	60Hz	250Hz 500Hz 1KHz	2KHz 4KHz 8KHz
STANDBY							PRO LOGIC	DOLBY B
						S	S
								NR
ON
								RDS
CLOCK/	CD1 • 2 • 3	FM • AM	TAPE 1 • 2		CDR / VIDEO			NEWS!
TIMER
	CD	TUNER	TAPE		AUX
	PROG		SIDE	A•B	▲ PRESET ▲	A.REV
	SEARCH • TUNING	STOP •CLEAR PLAY		PAUSE	PREV SIDE NEXT
DUB
(HSD)
REC		SOUND NAVIGATION						VOLUME
	INCREDIBLE		DYNAMIC BASS
	SURROUND		BOOST

DIGITAL

SOUND CONTROL

Notes:

–Only Œ mode is available during dubbing.

–At the end of side A, flip the tapes to side B and repeat the procedure.

–Dubbing of tapes is only possible from tape deck 1 to tape deck 2.

–To ensure good dubbing, use tapes of the same length.

–During high speed dubbing in Tape mode, the sound is reduced to a low volume.

–You can listen to another source while dubbing.

•CD will start playback automatically.

4 Press ‚ to stop recording.

One Touch Recording

•For One Touch Recording, as soon as you press REC, the current source (CD,TUNER or AUX) will be recorded on tape deck 2.

1Load a blank tape in tape deck 2.

2Press REC to start recording. ª The REC starts flashing.

3Press ‚ to stop recording.

Note:

–When you press RECORD while in TAPE mode, "SELECT SOURCE" will be displayed. One Touch Recording is not possible in TAPE mode.

View Clock

You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (CD,TUNER, etc.). The clock will be displayed for about seven seconds.

•Press CLOCK/TIMER briefly.

ª“PM 10:38 or 22:38 ” (the current time) will be displayed depending on whether you have selected 12- or 24-hour mode.

ª“--:--” will be displayed if the clock is not set.

Note:

–When the system goes into low power standby mode, the clock setting will not be displayed (for model FW-C72 only).

Clock Setting

The clock can be set in either 12- or 24-hour mode, e.g. “AM 12:00“ or “00:00“. Before setting the clock, you must be in the View Clock mode.

1Press CLOCK/TIMER to select clock mode.

2Press PROG (on the system only) to select 12- and 24- hour mode.

ªIf 12-hour mode is selected, “AM 12:00“ starts flashing.

ªIf 24-hour mode is selected, “00:00” starts flashing.

3Set the hour withʈ or ‡ on the system.

4Set the minute withÊ’ or ‘ on the system.

5Press CLOCK/TIMER again to store the setting.

ªThe clock starts.

pg 01-27/C71-C72/37-Eng 22 12/16/99, 1:20 PM 3139 116 19521 (ENG)