RCA DRC233N manual Back of the DVD Player, Explanation of Jacks and Cables, Audio Jacks and Cables

Connections and Setup

COMPONENT/

PROGRESSIVE

VIDEO OUT

The back of your DVD player

12

Back of the DVD Player

Explanation of Jacks and Cables

There are several ways to connect your DVD Player to your TV depending upon the cables you have and the jacks that are on the back of your TV. Different jacks and cables provide a different level of performance.The jacks on the back of your DVD Player and the cables used to connect them are explained below. A connection example and instructions are on pages 6 and 7.

AUDIO L and R jacks and cables

COAXIAL

DIGITAL AUDIO

OUT jack and cable

Audio Jacks and Cables

1AUDIO L (left) and R (right)

These jacks send the audio from the disc you’re playing to the TV.The audio jacks and cables are often color-coded (red for right audio, and white for left audio).You must connect audio cables to the AUDIO L and R jacks on the DVD Player and the corresponding Audio Input Jacks on the TV no matter which Video jack you connect (VIDEO; S-VIDEO; or Y, Pb, Pr).

If your component has only one input for audio (mono), connect it to the left (white L/Mono) audio jack on the TV and don’t connect the right audio part of the cable.

2COAXIAL DIGITAL AUDIO OUT

If you have a Dolby Digital or DTS audio/video receiver, connect a digital audio coaxial cable to the DVD Player’s COAXIAL DIGITAL AUDIO OUT Jack and to the audio/video receiver’s Digital Coaxial Input Jack.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.

DTS is a registered trademark of Digital Home Theater Systems, Inc.

3

Graphics throughout this User’s Guide are for representation only.