REFERENCE
FRONT PANEL CONTROLS
ON/OFF
MENU
INFOSELECT
ANTENNA
ON/OFF Turns the receiver’s power on or off.
INFO Brings up the
ANTENNA Switches the source of the video signal from satellite signals to an
ARROWS Press the navigation arrows to move the
MENU•SELECT Brings up the Main menu. If you are already in the menu system, press MENU•SELECT to select a highlighted choice.
ACCESS CARD Identifies you to your program providers. The system requires a valid access card.
BACK PANEL CONTROLS
OUT
TO
TV
IN
VIDEO | R AUDIO L |
SATELLITE IN | LOW SPEED DATA | PHONE JACK |
CH 4
CH 3
FROM
ANT
OUT TO TV Use to connect the receiver to your TV. However, if your TV has audio/video jacks, you should use those jacks to get better picture and sound quality.
IN FROM ANT Use to connect an
CH3/CH4 SWITCH If a coaxial cable is used to connect the receiver to your TV, you must set the CH3/CH4 SWITCH. For example, to see the signal on TV channel 3, set the switch to 3.
VIDEO Provides better picture quality than the OUT TO TV jack. If your TV has audio/video capability, use this jack to connect the receiver to your TV. You must also connect the AUDIO jacks.
AUDIO (R and L) Provide better sound quality than the OUT TO TV jack. If your TV has audio/video capability, use these jacks to connect the receiver to your TV. You must also connect the VIDEO jack.
SATELLITE IN Use to connect the receiver to the satellite dish antenna.
LOW SPEED DATA PORT this port allows you to connect the system to accessories, such as the Home Control base module.
PHONE JACK Use to connect a phone line to the receiver. The system requires a phone line connection to periodically call out to program providers.
51