Identifying Controls

Infra-red receiver

Receives infra-red signals from the television.

The liquid crystal shutter open/close timing is controlled by receiving infra-red signals from the television, which provide 3D expression of the images.

If the eyewear stops receiving infra-red signal from the television, the power automatically switches off after 5 minutes.

(Shown as TY-EW3D2MU)	Liquid Crystal Shutter
	(lens)

Controls the images for 3D viewing.

The left and right liquid crystal shutters are alternately opened and closed in time with the left side and right side images that are alternately displayed on the television to achieve the 3D effect.

Power switch (bottom side of 3D Eyewear)

Switches on the 3D Eyewear power. The 3D Eyewear is turned on by setting the power switch to “ON”. Set the power switch to “OFF” to turn off the 3D Eyewear.

Charging port

Connect the chaging cable.

( page 9)

Indicator lamp

Lights or flashes during use or charging to show the status of the rechargeable battery.

Battery status shown by indicator lamp

Power/indicator lamp status	Battery status
Lights for 2 seconds when turned on	Sufficient battery level

Flashes 5 times when turned on	Low battery level
Flashes once every 2 seconds when in use	Operating normally

Lights continuously when off	Charging

Lamp off	Power off

ENGLISH - 5