Panasonic VDR-D160GN manual 107, About the battery

Page 107

Do not touch the laser pickup lens.

If you touch the laser pickup lens directly it may cause malfunctions.

Do not use any other lens cleaners except a commercial available 8 cm DVD video camera lens cleaner.

Using any other lens cleaners except the one for 8 cm DVD video camera could cause this unit to malfunction.

Do not use the unit for surveillance purposes or other business uses.

If you use the unit for a long time, heat will build up inside it and this may cause a malfunction.

This unit is not intended for business use.

When you are not going to use the unit for an extended time

When storing the unit in a cupboard or cabinet, it is recommended that you place a desiccant (silica gel) in with it.

About the battery

The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls. In cold areas, the full charge indication may not appear or the low battery indication may appear about 5 minutes after starting use. At high temperatures, the protection function may be triggered, making it impossible to use the unit.

Be sure to detach the battery after use.

If the battery is left attached, a minute amount of current continues to flow even if the unit’s power is off. Keeping the unit in this state may result in over discharge of the battery. This may result in you not being able to use the battery even after it is charged.

Prepare spare batteries when going out for recording.

In cold places such as a ski resort, the period during which you can record pictures is shortened.

When you travel, do not forget to bring an AC adaptor (supplied) so that you can recharge the batteries at your destination.

Cautions for use

If you drop the battery accidentally, check to see if the terminals are damaged.

Attaching a battery with damaged terminals can damage the unit.

Tips for storing the battery

The battery should be stored in the vinyl bag so metal does not come into contact with the terminals.

The battery should be stored in a cool place free from humidity, with as constant temperature as possible. (Recommended temperature: 15 °C to 25 °C, Recommended humidity: 40% to 60%)

Extremely high temperatures or low temperatures will shorten the life of the battery.

If the battery is kept in high-temperature, high-humidity, or oily-smoky places, the terminals may rust and cause malfunctions.

To store the battery for a long period of time, we recommend you charge it once every year and store it again after you have completely used up the charged capacity.

Dust and other matter attached to the battery terminals should be removed.

Do not throw old battery into fire.

Heating a battery or throwing it into a fire may result in an explosion.

If the operating time is very short even after the battery has been recharged, the battery has worn out. Please purchase a new battery.

Others

107

LSQT1184

Image 107
Contents Before use, please read these instructions completely Model No.VDR-D160GNLaser Product IEC Use only the recommended accessoriesIf you see this symbol Carefully observe copyright laws Indemnity concerning recording contentContents Others EditingWith other products Easy recording! l FeaturesBefore using Easy playback! l Editing scenes! l 63 Using with DVD player/recorder! lBefore using DC cable AC cable AccessoriesOptional accessories UsingViewfinder l 12 Parts identification and handlingFlip the belt Adjust the length Fix the belt Before using Using grip beltAdjust the belt length so it fits your hand Adjust the belt length and the pad positionFitting the lens cap Tripod receptacle Before usingPull out the viewfinder Using the LCD monitorUsing the viewfinder 36, Adjusting viewfinderDVD-RAM DVD-RW Discs and cardsDiscs that can be used on this unit ≥ MO About format typesExamples of discs that cannot be used on this unit ≥ DVD-RAM 2.6 GB VerVideo DVD-Video format VR DVD Video Recording format When using brand-new DVD-RWCards that you can use with this unit Disc and card handling How to hold a disc or cardWhen inserting/removing a disc Handling precautionsCharging lamp Lights up Charging Power supplyCharging the battery Setup≥ Hold the battery with your hand so it does not fall Charging time Battery model number Voltage/capacity Charging timeBattery model Voltage Recording Maximum Intermittent Charging time and recordable timeConnecting to the AC outlet Turning the unit on/off Status indicator B goes offRemoving disc Inserting/removing a discSlide the Disc Eject lever once and release it Inserting discAfter inserting a disc/After recording finishes Recording/playback side is opposite to the labelled sideDouble sided disc Concerning the SD card Card access lampInserting/removing an SD card Securely close the card slot coverCard recording mode l Selecting a modeDisc recording mode l Disc playback mode lSelect by moving up How to use the joystickBasic operations Joystick and screen displayIcon Direction Function AdjustmentsDisc playback mode Operation icon is offDirection Function Self timerCard recording modeAUTO MANUAL/FOCUS switch is set to ManualSlide show start/pause Card playback mode When Slide Show is selectedSwitching the language While stopped, press the Menu button Using the menu screenPress the Menu button To exit the menu screenMove the joystick left ≥ The 24-hour system is used to display the time Setting date and timeIf the screen shows the incorrect date/time, then adjust it Date OFF ≥ The recording time is not displayed in disc playback mode1530 2006.12.15 12.15.2006 15.12.2006 EVF EVF SET Adjusting LCD monitor/viewfinderLCD SET Basic camera positioning Before recordingRAM -RW‹VR› -RW‹V› -R Record motion pictures onto a disc Recording motion picturesRecording Remove the lens cap, then turn the unit on Flashes red Recording mode Recording time elapsed Screen indications in the disc recording modeRecording mode Recordable time Changing the recording mode of the motion pictureTo record still pictures clearly Rotate the mode dial to select Press the buttonRecording still pictures Record the still picture on an SD cardSize of still pictures C Quality of still pictures Screen indications in card recording modeProgressive function Recording with a shutter operation effectRecording Digital zoom function Various recording functionsZoom in/out function Move the zoom leverRotate the LCD monitor towards the lens side Recording yourselfTo use the zoom microphone function Select again Soft skin modeStart recording. Fade Fade in/fade out functionColour which appears in fading pictures can be selected To cancel fadingTo select the colour for fade in/out Pause recording. Fade outSelect ª again Backlight compensation functionTo return to normal recording Image on the screen will become brighterPress the Menu button. The self-timer setting is cancelled Self-timer recordingTo stop the timer midway through You can record still pictures on an SD card using the timerRAM -RW‹VR› -RW‹V› -R Cinema modeWind noise reduction function Image stabilizer function To cancel the Night view functionNight view function Manual recording functions Scene modeDisplay Mode Recording conditions To cancel the scene mode function Manual focus indication 1MF is displayed Manual focus adjustmentTo restore to the automatic adjustment White balance Set the AUTO/MANUAL/FOCUS switch to ManualRecording To restore to the automatic adjustment About the white balance sensor a Move the joystick down several times and select Manual shutter speed/aperture adjustmentMove the joystick left or right to make the adjustment Recording To restore to automatic adjustmentPlayback Press the joystick Rotate the mode dial to selectMotion picture playback Select the scene to be played backFrame-by-frame playback To adjust the volumeMove the volume lever to change the volume level To display the recording date during playbackScenes recorded on the same day are displayed as thumbnails Playing back motion pictures by dateSelect the date for playback, then press the joystick Select the file to be played back Still picture playbackAbout still picture compatibility Playing back still pictures as a slide showDeleting scenes one at a time Editing scenesDeleting scenes To complete editing Deleting multiple scenes from the thumbnail displaySelect the scene to be deleted, then press the joystick To continue deleting other scenesSelected scene is played back Dividing a sceneRAM -RW‹VR› Combining scenesRecorded scenes Playlist Using playlistsWhat is a playlist? To playback a playlist Creating a new playlistTo add another scene to the same playlist Scenes in the selected playlist are displayed as thumbnails Playing back a playlistTo return to showing the original scenes To continue adding scenes to the playlist Editing a playlistAdding scenes to playlist Scenes in a playlist can be moved Moving scenesDividing a scene ≥ The selected scene and the next scene are combined Combining scenesDeleting scenes Select Delete # Select or ALL and press the joystick Deleting files one at a time Deleted files cannot be restoredEditing still pictures Deleting still picturesTo continue deleting other files Deleting multiple files from the thumbnail displaySelect the file to be deleted, then press the joystick Locking still pictures To complete the settingsNumber of prints set to be in Dpof is displayed Dpof settingTo cancel all Dpof settings What is DPOF?This is for initializing discs Formatting discs and cardsFormatting discs This is for initializing cards Formatting an SD cardDVD-RAM Finalizing a discFinalizing a disc Connect this unit to the AC adaptorUn-finalizing a DVD-RW Protecting a disc Displaying disc information Start playback on this unit With a TVPlayback on TV Connect this unit and a TVPlaying back a DVD-RW Video format or a DVD-R With a DVD recorder/playerPlayback on a DVD recorder, DVD player, computer etc Playing back a DVD-RAM or a DVD-RW VR formatCopying recordings onto a DVD recorder’s hard disk To stop dubbing With a VCRDubbing images onto other video devices Connect this unit and a video device≥ Press the Menu button to exit the menu screen With a printer PictBridgeConnect this unit and a printer Select a file to be printed, then press the joystick≥ You cannot set paper sizes not supported on the printer Select the paper size setting on Paper SizeStandard T5 Inch Size T7 Inch 2L size T6 Inch Postcard size A4 sizeSelect Print # YES and press the joystick Select the layout setting on page LayoutWhen you stop printing halfway Still picture recording menus MenusMenu list Motion picture recording menusEdit Scene Play SetupMotion picture playback menus Still picture playback menus Setup menu Recording indications IndicationsIndications 100-0001 Playback indicationsConfirmatory indications No.10Messages About recovery 100 Functions Conditions which Disable the functionsFunctions that cannot be used simultaneously 101 Frequently asked questions102 TroubleshootingProblem Check points 103 Problem Check points Disc Eject leverDoes not work # Connect a charged battery or AC adaptor 104 105 About this unit 106107 About the batteryDVD-R 108About the AC adaptor About the discAbout the miniSD Card 109About the SD card LCD monitor/viewfinder What to do with the lens is fogged up 110About condensation Causes of condensationWhite balance Explanation of terms111 Automatic white balanceAuto focus 112DVD Video Camera Specifications113 114 Picture size 640 k480 Picture quality Number of recordable pictures on an SD card115 LSQT1184 a