Panasonic TZ-DBS01 Setup System Test, Component Requirement Display Information

ROLLER GUIDE MENU OPERATIONS

Setup : System Test

The System Test menu allows you to invoke a system test which perform a check of the following subsystems.

Component	Requirement				Display Information
Tuning Test	This	attempts to	tune	to an	Status: PASSED or FAILED
	known frequency.
Signal Test	This tests the signal strength.				Status: PASSED or FAILED
Phone Test	This	checks	the	modem	Status: PASSED or FAILED
	operational status.
Access Test	This	checks the	Access Card		Status: PASSED or FAILED
	function.
Card ID	Card is installed in TZ-DBS01				Serial # xxxx-xxxx-xxxx

Note: System test is only available for Satellite input.

The following screens show the system test screen and the system test in progress.

Sat Setup

Monitor

System Test

Access Card

TV Output

Start

Tuning Status:

Signal	Status:
Phone	Status:

Access Status: Card ID

Sat Setup

Monitor

System Test

Access Card

TV Output

Start

Tuning	Status:	PASSED
Signal	Status:	PASSED
Phone	Status:	PASSED
Access	Status:	CHECKING
Card ID	322452186

Press uto start system test.

System Test Screen

Press ACTION to start the system test.

System Test Screen (System Test in progress)

Procedure

ρIn SETUP menu, press π or θ button to highlight System Test.

ρPress υ button to highlight Start.

ρPress ACTION button to start the System Test.

ρPress τ button to return to Setup Menu.

41