Panasonic PT-56LCX70-K, PT-61LCX7 Channel and Program Tuning, Unit Status Display, Audio Mute

Page 30

Projection Display operation (continued)

Channel and Program Tuning

Channel and Program tuning in digital television differs from conventional television. With DTV, many programs can exist within a single 6 MHz channel. These channels behave as sub-channels within a single channel. When tuning to a digital channel, the unit will also tune to a program and will indicate the channel and program in the on-screen Channel Banner display.

In order to select channels properly, Auto program must be performed. (p. 26-27)

Follow the procedure below to directly enter the channel number using the NUMBER keys.

Select analog channel

Procedure

1.Press the NUMBER keys to enter the Channel number. Press OK.

•The following is an example of tuning to channel 15.

Direct Tuning Example

Step

Action

Channel Banner Display

1

Press 1

1

2

Press 5

15

3

Press OK

15

Note

•If, during channel selection, no action is taken for several seconds, the Channel Banner is exited and the currently input channel is automatically selected.

Select digital channel

Procedure

1.If tuning a digital channel and your channel contains more than one program, press PROG- and enter the program (1, 2, 3 etc.) using the NUMBER keys. Press OK.

•The following is an example of tuning to channel 15-1.

Direct Tuning Example

Step

Action

Channel Banner Display

1

Press 1

1

2

Press 5

15

3

Press PROG-

15-

4

Press 1

15-1

5

Press OK

15-1

Note

•If, during channel selection, no action is taken for several seconds, the Channel Banner is exited and the currently input channel is automatically selected.

Unit Status Display

Press CH <>or RECALL, except when the MENU screen is displayed, to display current unit status information.

Channel Banner: Minimized

Procedure

1. Press CH <>to minimize the displayed channel banner.

•It will display the channel number, and the station identification (if available).

Channel Number

15-2

ABC-HD

Station Identifier

Channel Banner: Maximized

Procedure

1.Press RECALL to maximize the displayed channel banner.

Channel, Program and Station identifier

Program title

 

 

 

 

 

 

 

 

 

 

 

 

15-2

Andrew’s cooking show

 

 

 

ABC-HD

CC SAP

TV-G

1080i Standard

4:3

 

30

 

 

 

 

 

 

 

 

 

 

 

 

Closed Caption

 

 

 

Rating Level Picture mode

Time remaining

 

 

 

 

 

 

 

 

 

in Sleep Timer

 

SAP indication

Signal resolution Aspect ratio

 

Audio Mute

Press MUTE to instantly mute the sound. Press again to restore the previous sound level.

Procedure

1.Press MUTE to mute the sound. Press again to reactivate sound.

•Sound is also reactivated when power is turned off or volume level is changed.

Note

• The audio output from AV OUT is not muted.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Canada Product safety notificationPuerto Rico Case your new Projection Display is stolenKeep these instructions for future reference Follow all instructions carefullyGetting Started ViVAFCC Caution For assistance, please call 1-888-VIEW PTV843-9788For assistance, please call Canadian NoticeTable of Contents Before Using Observe the following precautions Remote Control Battery InstallationReset All Memory Functions Press cover until it snaps shutCleaning Projection DisplayExit Remote ControlLocation of Controls ReturnFront View Model PT-56LCX70 unit shown PowerControls and Terminals on the Projection Display LampRear View Model PT-56LCX70 unit shown Digital AudioOUT Installation Connected Equipment Introduction Signal sourceReference of connection Example 1 Connecting Antenna To watch TV To connect antenna terminalsExample 2 Connecting DVD recorder VCR To record/playback To use Composite terminals To use Hdmi terminalsTo use Component terminals To use S Video terminalsExample 3 Connecting DVD recorder VCR and satellite receiver Connecting this Projection Display and DVD recorder VCRDVD Example 4 Connecting Home Theater and DVD recorder To connect Hdmi terminalsPC in Terminal D-SUB 15P Pin Layouts Connecting PCTo connect PC terminals NC Not connectedRGB signals that can be input DVD Player/Set Top Box Recommended AV ConnectionsImages Amplifier Camcorder/VCR/DVD PlayerConnecting this unit to a DVD recorder and AV amp Setting this unit after connectionsEZ Sync Connections Input signals that can be displayed Hdmi connectionAbout Hdmi Power on Power on / OFFTurning the Power on and OFF Power OFFAuto program First Time SetupLanguage Press to select ANT Press to select Cable or AntennaAutomatic program setting Tuning channelsSwitching languages for display Press to select English, Español or FrançaisManual program setting Press to select ANT Press to select Antenna or CableEdit Caption Press to select Edit Press OK to enter the edit modePress to select the desired preset channel line Press to select Apply Press OK to enter the CaptionUsing the CH/VOL Button Selecting Input ModeRapid Tuning Projection Display OperationChannel and Program Tuning Unit Status DisplayAudio Mute Press SUB Menu to display the Setup SUB Menu Favorite FeatureSet Favorite Feature Display the SUB MenuDigital mode Select Audio Mode for TV ViewingUse Favorite Feature Analog modeChanging the Aspect Mode Aspect mode changes each time Aspect is pressedAspect Controls Press to select the equipment EZ Sync FeatureEZ Sync Return to TV screenPicture Adjustments Press to select each item Press to adjust each itemZoom Adjust Picture ModePro Setting Press to select Picture mode Press to select picture modePC Adjust Other AdjustAudio Adjustments Normal / Bass / Treble / BalanceBBE Viva Sleep Timer Feature Set Sleep TimerPress to select 0, 30, 60, or Create Password Lock FeatureEnter Password Press Number keys to enter your passwordPress to select Mode Press to select Custom Enter PasswordPress to select Mode Press to select the desired setting Lock SetGame Lock Rating level settingMonitor out setting Block programMovies Ratings Chart Mpaa Change password Blocking MessagesCard Warning Messages Viewing from SD CardInsert/Remove the Card Insert the CardSlide Show Mode Photo viewer ModeSingle Play Mode Exit Photo viewerTo Adjust Picture Single Play ModeTo Watch Photos in Slide Show Mode Viewing from a GalleryPlayer SD CardSignal Meter Setup FeaturesSurf Mode Press to select Surf mode Press to select Favorite or AllPress to select desired channel Input labelsMonitor out Press to select each item Press to select the input labelCC Mode for Digital CC ModeCC Mode for Analog CC Closed CaptionPress to select each item Press to select the setting Digital settingsCC Reset EZ Sync Hdavi ControlPress to select EZ Sync Press to select On Automatic Input SwitchingSpeaker control Press EZ Sync to display the EZ Sync menuHome theater Available this Projection Display’s remote control buttonsOne-touch theater playback Press to select each item Press to select Set or NoPress to select About Press OK to display the About screen ResetAbout Confirmation screen is displayed. Select Yes, and press OKPower Troubleshooting On nextTroubleshooting Problem Possible solutionSpecifications PT-50LCX7/PT-50LCX7KCustomer Services Directory for U.S.A Npcparts@us.panasonic.comCategory Parts Labor Service Limited Warranty for U.S.ALimited Warranty Coverage Carry-in or In-Home ServiceIf YOU Ship the Product to a Servicentre Limited Warranty for CanadaWarranty Service Limitations and ExclusionsIndex DTVCustomer’s Record
Top Page Image Contents