First time Auto Tuning
Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time.
●These steps are not necessary if the setup has been completed by your local dealer.
●Please complete connections (p. 7 - 10) and settings (if necessary) of the connected equipment before starting Auto Tuning. For details of settings for the connected equipment, read the manual of the equipment.
1 Plug the TV into mains socket and turn power on
●Takes a few seconds to be displayed.
2 Select the following items
Set up each item by following the
Select your language
Select [Home]
Select [Home] viewing environment to use in your home environment.
●[Shop] is for shop display.
●To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.
Set up the network connection Select your country
Select your area
●When selecting [CATV/Other], press the OK button, and then select the Channel Plan from Indian CATV, South
Africa, American System, American CATV or Japan CATV.
Confirm the Electronic Touch Pen (optional accessory) introduction screen
3 Select the type of [Home Screen]
The demonstration to explain how to use [my Home Screen] is displayed. Confirm the demonstration by following the
Example: [Home Screen Selection] | Example: [TV Home Screen] |
●[my Home Screen] is the
Auto Tuning is now complete and your TV is ready for viewing.
If tuning has failed, check the connection of the network, RF cable, and then follow the
Note
●The TV will automatically go into Standby mode when no operation is performed for 4 hours if [Auto Standby] in the Timer Menu is set to [On].
●The TV will automatically go into Standby mode when no signal is received and no operation is performed for 10 minutes if [No signal Power off] in the Timer Menu is set to [On].
●To retune all channels [Auto Tuning] in [Tuning Menu] (Setup Menu)
●To initialise all settings [Shipping Condition] in [System Menu] (Setup Menu)
13