EZ SyncTM Hdavi ControlTM, Hdmi connection

EZ SyncTM “HDAVI ControlTM”

HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 28)

•This function may not work normally depending on the equipment condition.

•The equipment can be operated by other remote controls with this function on even if TV is in Standby mode.

•Image or sound may not be available for the first few seconds when the playback starts.

•Image or sound may not be available for the first few seconds when Input mode is switched.

•Volume function will be displayed when adjusting the volume of the equipment.

•If you connect the same kind of equipment at once (for example: one DIGA to HDMI 1 / another DIGA to HDMI 2), EZ SyncTM is available for the terminal with the smaller number.

•If you connect the equipment that has “HDAVI Control 2” function to the TV with HDMI cable, the sound from DIGITAL AUDIO OUT terminal can be output as multi channel surround.

HDMI connection

HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting the TV unit and the devices.

HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connected to the HDMI connector using an HDMI compliant (fully wired) cable.

•HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.

•If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).

•When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.

•Audio settings can be made on the “HDMI 1 in” or “HDMI 2 in” menu screen. (p. 24) Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz

Caution

(*1): The HDMI logo is displayed on an HDMI-compliant device. (*2): Enquire at your local digital equipment retailer shop.

•Use with a PC is not assumed.

•All signals are reformatted before being displayed on the screen.

•If the connected device has an aspect adjustment function, set the aspect ratio to “16:9”.

•This HDMI connector is “type A”.

•These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.

•A device having no digital output terminal may be connected to the input terminal of either “COMPONENT”, “S VIDEO”, or “VIDEO” to receive analog signals.

•The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i and 1080p. Match the output setting of the digital device.

•For details of the applicable HDMI signals, see below.

Input signals that can be displayed

* Mark: Applicable input signal for Component (Y, PB, PR) and HDMI

					horizontal	vertical	COMPONENT	HDMI
					frequency (kHz)	frequency (Hz)	COMPONENT	HDMI
					frequency (kHz)	frequency (Hz)
525		(480)		/ 60i	15.73	59.94	*	*
	525	(480)		/60p	31.47	59.94	*	*
	750	(720)		/60p	45.00	59.94	*	*
	1,125		(1,080) /60i		33.75	59.94	*	*
	1,125		(1,080)/60p		67.43	59.94		*
	1,125		(1,080)/60p		67.50	60.00		*

Note

•Signals other than those shown above may not be displayed properly.

•The above signals are reformatted for optimal viewing on your display.

Technical Information FAQs,

•Vivid (default):

•Standard:

•Cinema:

•Custom (Photo):

Picture mode

Provides enhanced picture contrast and sharpness for viewing in a well-lit room. Recommended for normal viewing conditions with subdued room lighting.

For watching movies in a darkened room. It provides a soft, film-like picture. Customizes each item according to your taste.

Photo is displayed in Jpeg menu.

etc.