Panasonic DVD-RP82 warranty Replaying a scene-QUICK Replay, Starting play from a selected item

Replaying a scene—QUICK REPLAY

[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]

Skip back a few seconds within the current item (program, track or title).

During play

Press [QUICK REPLAY].

[Note]

This feature may not work while playing some parts of a disc or at all with some discs.

Starting play from a selected item

[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]

Press the numbered buttons to select the item.

To select a 2-digit number

e.g. 23: [S10] ➡ [2] ➡ [3].

[WMA] [MP3]

Press [ENTER] after pressing the numbered buttons. (You do not have to press [S10].)

Play starts from the selected item.

[Note]

≥This works only when stopped with some discs.

≥When playing DVD-Audio and you want to start play from a track in a different group, select the group first (➡ page 12).

Setting the unit to turn off—SLEEP timer

[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]

Press [SLEEP] to select the setting.

Each time you press the button:				ZZ
§
OFF #AUTO #60 min #90 min #120 min				60 min
^————————————————}
§The unit turns	off 5 minutes after play
finishes.			The unit turns off after
			60 minutes.
	DVD- A V R CD		GRP TTL TRCK CHAP D.N.R. D.MIX RMTRPG M	A B C D
	WMA A.ONLY
	MP3 PROG. SLEEP
	A	B PGM RND

To cancel the SLEEP timer

Press [SLEEP] to select “OFF”.

To confirm the remaining time

Press [SLEEP].

[Note]

≥AUTO also works with DVDs that show a menu after play finishes.

≥AUTO does not work if you press [∫], [MENU] or [TOP MENU]. It is activated again when you restart play.

≥AUTO does not work correctly with some discs (e.g., if menus appear after playing Video CDs).

[WMA] : for U.S.A. and Canada only

Resume function

[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]

(When the elapsed play time is displayed)

The position you stopped play at is recorded by the unit when “!” is flashing on the display.

DVD- A V R CD	GRP TTL TRCK CHAP D.N.R. D.MIX RMTRPG M A B C D
WMA A.ONLY
MP3 PROG. SLEEP
A B PGM RND

While “!” is flashing, press [1] (PLAY) to start play from where you stopped it. (When playing DVD-Video ➡ Chapter Preview below)

≥The position is cleared when the disc tray is opened or the unit is

switched to standby.
To clear the position
		operations
Press [∫] before recalling the memorized position.
Position Memory function
This function allows you to memorize a position to start from even after		Basic
switching the unit to standby or changing discs. You can memorize
positions on up to five different discs at a time. When you memorize
another position, the earliest position is replaced.
≥This function does not work while playing some DVDs or play lists on
DVD-RAM.
1. During play, press [POSITION MEMORY].
	Position memorized
	Light as you memorize positions.

2.Press [POWER Í] to switch the unit to standby or press [<] to remove the disc.

3.When you are ready to play the disc again, press [1] (PLAY). Play starts from the memorized position and the position is cleared. (When playing DVD-Video ➡ Chapter Preview below)

To clear the position

Press [∫] before recalling the memorized position.

Chapter Preview [DVD-V]

One of these messages appears immediately after you press [1] (PLAY).

Press PLAY to Preview Chapters Press PLAY to Chapter Review

Press [1] (PLAY) while the message is displayed and the beginning portions of each chapter up to the current one are played. Full play resumes from the point where you pressed [∫] or [POSITION MEMORY]. (This feature works only within a title.)

If you do not press [1] (PLAY), the message disappears and play starts from where you pressed [∫] or [POSITION MEMORY].

∫Auto standby

The unit switches to standby mode after about 30 minutes in the stop mode, irrespective of the SLEEP setting.

RQT6549

11