Panasonic TC-50PS64, TC-65PS64 owner manual Attaching the pedestal to TV

Attaching the pedestal to TV

Assembly screws (black) Bracket Neck Base

(7) (for 50")

(12) (for 65")

M5 × 16

Assembly screws (black)

(4) (for 50")

M4 × 10

Attaching the pedestal

	A	3
	C
	D
1		E

2

A

4

5

A (for 65")

B (for 50")

TC-50PS64 TC-65PS64

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

Remove the assembly screws (for 65") /

(for 50") from the TV.

Lift the TV from the pedestal.

Remove the assembly screws from the bracket. Remove the assembly screws from the bottom of the base and pull out the neck.

Warning

Do not disassemble or modify the pedestal.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than that provided with this TV.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)

Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.

10