Connection
Before connection | ≥The equipment connections described are examples. | |
≥Disconnect the AC power supply cord. | ||
≥Peripheral equipment and optional cables sold separately unless | ||
≥Turn off all equipment and read the appropriate operating instructions. | ||
otherwise indicated. | ||
| ||
|
|
Getting started
Connection to a television
This page explains how to connect the unit to a television and set it up so you hear the audio through the television’s speakers.
To get the full benefit from the powerful
Do not place the unit on amplifiers or equipment that may become hot.
The heat can damage the unit.
Connect your unit directly to your television.
Do not connect the unit through your video cassette recorder when setting up your home entertainment system, because the picture may not be played correctly due to the copy guard.
∫Basic connection
Television
AUDIO VIDEO
IN IN
L
R
red white yellow
red white yellow
Audio/video cable
(included)
You can connect the audio cable to the 2- channel audio input terminals of an analog amplifier or system component to enjoy stereo or Dolby Pro Logic.
| AUDIO OUT | |
DIGITAL AUDIO OUT | CENTER SURROUND FRONT L/L | |
(PCM/BITSTREAM) | ||
L | ||
|
AC IN |
|
SUB | R |
OPTICAL WOOFER | SURROUND FRONT R/R |
| 5.1ch |
| COMPONENT VIDEO OUT |
| |
|
| (480P/480I) |
|
L | PB | Y |
|
R | PR | VIDEO OUT | S VIDEO OUT |
2ch |
| ||
∫For better pictures
Television’s |
|
COMPONENT |
|
VIDEO IN |
|
terminals | Video cable (not included) |
|
Television’s |
|
S VIDEO IN |
|
terminal | S video cable (not included) |
|
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive output (➜ page 9) and provide a purer picture than the S VIDEO OUT terminal. Connection using these terminals outputs the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors.The description of the component video input terminals depends on the television or monitor (e.g. Y/PB/PR,
≥When making this connection, ensure you connect the audio cables to the corresponding audio input terminals on the television.
≥After making this connection, change the black level for a better picture (➜ page 20,
RQT6974
S VIDEO OUT terminal
The S video terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance
(C)and luminance (Y) signals. (Actual results depend on the television.)
≥When making this connection, ensure you connect the audio cables to the corresponding audio input terminals on the television.
6