Setup |
| Other function settings | |
Settings | Items | Item Description | |
Channel surf | All/Favorite/ | Sets the mode to select the channel with the Channel up/down button. | |
mode | Digital only/ | Favorite: Only channels registered as FAVORITE. (p. 17) | |
| Analog only |
| |
Language | English/ | Selects the screen menu language. | |
| Español/ |
| |
| Français |
| |
Clock |
|
| Adjusts the clock. (p. 14) |
ANT/Cable setup See p.
Input labels
(Display labels of connected devices)
Selects the terminal and label of the external equipment.
Devices connected to external input terminals can be labeled for easier identification during the input selection. (Input select (p. 18))
Terminals: HDMI 1/HDMI 2/Component/Video/PC
Label: [BLANK] Not
MEDIA EXT/OTHER
•• You can also enter the label name directly. (Entering characters (p. 16))
HDMI control See p. 24 for more detail.
Eco/Energy | Power save | Reduces screen brightness to lower power consumption. | |
saving | (Standard/ | viewing in a dark room. | |
| Saving) |
|
|
| No signal for | To conserve energy, the TV automatically turns off when NO SIGNAL and | |
| 10 minutes | NO OPERATION continue for more than 10 minutes. | |
| (Stay on/ | • Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set. | |
| Power TV | • “No signal for 10 minutes was activated” will be displayed for about 10 | |
| seconds when the TV is turned on for the first time after the power was | ||
| off) | turned off by “No signal for 10 minutes”. | |
|
| • The | |
|
| remaining minutes prior to the | |
|
|
|
|
| No activity | To conserve energy, the TV automatically turns off when no operation of | |
| for 3 hours | remote and side panel key continues for more than 3 hours. | |
| (Stay on/ | • Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set, | |
| Power TV | or while “PC input” is selected. | |
| • No activity for 3 hours was activated” will be displayed for about 10 | ||
| off) | seconds when the TV is turned on for the first time after the power was | |
|
| turned off by “No activity for 3 hours”. | |
|
| • The | |
|
| remaining minutes prior to the | |
|
|
|
|
Advanced | Auto power | Turns TV On automatically when the cable box or connected device is | |
setup | on(No/Yes) | turned On. TV AC cord must be plugged into this device. TV turns on every | |
|
| time the power is restored. | |
| Image viewer Displays the confirming message or not if the USB stick is inserted into the |
| |
| auto play | TV. | |
| (Off/On) |
|
|
First time setup |
| Restarts the first time setup from “Language” setting. (p. 12) |
|
About |
| Displays TV version and software license. |
|
Reset to |
| Performing Reset will clear all settings made with Setup, such as channel | |
defaults |
| settings. | |
|
| • Password setting/entering (p. 16) |
|
32