Panasonic TC-40A420U, TC-32A400U Wall mounting the TV optional, Removing the pedestal from the TV

•40” class

Wall mounting the TV (optional)

Please contact a professional installer to purchase the recommended UL qualified wall-hanging bracket. For additional details, please refer to the wall-hanging bracket installation manual.

Up the TV	1
Setting

Rear of the TV

a

b

(View from the side)

Depth of screw

Screw for fixing the TV onto the wall- hanging bracket (not supplied)

2

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1 Lay the TV on a foam mat or thick soft cloth on a table (32” class only).

2 Remove the assembly screws from the TV.

3 Pull out the pedestal from the TV.

4 Remove the assembly screws from the bracket.

■Holes for wall-hanging bracket installation

Class	a	b
32”	7.9” (200 mm)	7.9” (200 mm)
39”
40”	7.9” (200 mm)	3.9” (100 mm)

■Screw specification

Class	Type	Depth of screw
		Minimum	Maximum
32”	M4	0.36” (9 mm)	0.55” (14 mm)
39”	M6	0.44” (11 mm)	1.06” (27 mm)
40”	M6	0.44” (11 mm)	0.59” (15 mm)

Warning

●Always be sure to ask a qualified technician to carry out set-up.

●Do not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) that typically give off high heat. Doing so may warp or damage plastic cabinet parts.

●Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket.

●To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.

●Incorrect wall-hanging bracket or incorrect fitting may cause equipment to fall, resulting in injury and product damage.

●Panasonic disclaims liability for any damage or injury arising from incorrect wall-hanging bracket, incorrect fitting or otherwise failure to follow the above instructions.

10English