Panasonic TC-L32C22 Displaying PC Screen on TV, Display the Input select menu, Select PC, Picture

Displaying PC Screen on TV

The screen of the PC connected to the unit can be displayed on the TV.

You can also listen to PC sound with the audio cable connected. To connect PC (p. 39)

Display the Input select menu

Input select

1	TV
2	HDMI 1	DVD
3	HDMI 2
4	Component	AUX
5	Video 1
6	Video 2
7	PC

(example)

Select “PC”

PC

Displays

PC screen

To return to TV /

PC menu setting (change as desired)

Making settings “How to Use Menu Functions” to (p. 23)

Corresponding signals (p. 44)

Menu

Picture

Item		Adjustments/Configurations (options)
Reset to defaults	Resets PC adjust. Confirmation screen is displayed. Select “Yes” and press OK to reset.
Sync	H & V:	The H and V sync signals are input from the HD/VD connector. (p. 45)
	On green: Uses a synchronized signal on the Video G signal, which is input from the
		G connector. (p. 45)
Dot clock	Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred.
H-position	Adjusts the horizontal position.
V-position	Adjusts the vertical position.
PC
adjustments	Alleviates the problem if the whole picture appears to flicker or is blurred.
	First adjust the Dot Clock to get the best possible picture, then adjust the
Clock phase	Clock Phase so that a clear picture appears.

Note

It may not be possible to display a clear picture due to poor input signals.

Input	Switches to wide display.
	Input signal switched from 640×480 to 852×480
resolution
	Input signal switched from 1024×768 to 1280×768 or 1366×768
H-frequency	Displays the H (Horizontal)/V (Vertical) frequencies.
	Display range
V-frequency	Horizontal: 15	- 110 kHz
	Vertical: 48	- 120 Hz

22 Audio menu (p. 24)