Panasonic TC-L22X2 quick start Care and Cleaning

Page 49

PC Input Terminals Connection

Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

Some PC models cannot be connected to the set.

There is no need to use an adapter for computers with IBM PC/AT compatible D-sub 15P terminal. The maximum resolution: 1,280 × 1,024

If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity. Signal Names for D-sub 15P Connector

 

 

 

 

Pin No.

Signal Name

Pin No.

Signal Name

Pin No.

Signal Name

11

12

13

14

15

R

 

GND (Ground)

 

NC (not connected)

6

7

8

9 10

G

 

GND (Ground)

 

NC

1

2

3

4

5

B

 

GND (Ground)

 

HD/SYNC

 

 

 

 

 

NC (not connected)

 

NC (not connected)

 

VD

Pin Layout for PC Input Terminal

GND (Ground)

 

GND (Ground)

 

NC

Care and Cleaning

First, unplug the Power cord plug from the wall outlet.

Display panel

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint- free cloth.

If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap diluted by 100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.

Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected.

Cabinet

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the cloth dry. Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth.

Do not allow any mild liquid dish soap to come into direct contact with the surface of the LCD TV. If water droplets get inside the unit, operating problems may result.

Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

Pedestal

Cleaning

Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small amount of mild liquid dish soap has been added and then wipe with a dry cloth.

Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating. (If using a chemically-treated cloth, follow the instructions supplied with the cloth.)

Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with rubber, vinyl products, or the like. (Doing so will cause deterioration.)

Power cord plug

Wipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.)

CareTechnicalandInformationCleaning FAQs, etc.

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Viera English EspañolHDMI, the Hdmi logo and High Experience an amazing level of multimedia excitementContents Important Safety Instructions Safety PrecautionsSecure Ventilation Contact Source Responsible Party Panasonic Corporation of North AmericaViera Consumerproducts@panasonic.comTune Into Safety Accessories Accessories/Optional AccessoryOptional Accessory Attaching the pedestal to TV Adjust the panel to your desired angleAntenna terminal Pin terminals Hdmi terminalBasic Connection Connecting Antenna To watch TVVHF/UHF Antenna CableAV Equipment AV cable connectionsBlu-ray Disc player PlayerRemote control TV controls/indicatorsIdentifying Controls Front of the TVTurn the TV On with the Power button First Time SetupConfigure your viewing mode Select your languageQuick Start First Guide Auto channel setup ANT/Cable setupComplete the First time setup Adjust the Clock Set clockSelect the Input labels Label inputs About broadcasting systemsWatching TV Turn power onSelect a channel number Listen with SAP Secondary Audio ProgramInformation Favorite FeatureRecall Change aspect ratio Call upDisplay Viera Tools Select the item Using Viera ToolsSet each item Press to returnInsert the SD card Set Image viewer settings and select Play image viewer nowSelect the data to be viewed ViewSD Card Photo settingsSort ViewingPlaying an iPod on TV Set up Universal Dock for iPodFeature Basic featureIPod menu feature Available modes for your iPodSelect the category in the Selector tab Display main windowSelect track in the List window and play Playing an iPod on this TVHow to play a favorite song? SettingsRemote ModeEnter Display the Input select menu Select the input modeTerminal LabelSelect Viera Link settings Display the menu Select SetupDefault is On Select Viera LinkDisplay the Input select menu Displaying PC Screen on TVSelect PC PictureAdjust or select How to Use Menu FunctionsDisplay the menu AdvancedMenu list LockSub menu list SetupHdmi cable Viera LinkTM Hdavi ControlTMSetting of this unit after connection Connecting this unit to a DVD recorder Diga and AV ampViera LinkTM Connections Default Speakers One-touch theater playback Select settingsProvides setting information SetFor Recorder Transmittable data Recorder Home theater PlayerDisplay the Viera Link menu Viera Link control only with the TV’s remote controlSelect Speaker controlRemote control, pointing it at the TV Select the equipment you want to accessAvailable TV remote control buttons Select Speaker output Select Home theater or TVSelect the Lock mode Input your 4-digit passwordLock Display the menu Select LockSelect Mode and set to On Select Mode and set to Custom Select a channel to lockTo change the password To select the channel or the rating of the program to lockSelect ANT/Cable setup Editing and Setting ChannelsCheck signal strength Select the functionTo cancel the Edit Select a scanning mode pSelect ANT Select Auto programSelect Closed caption Closed CaptionDisplay Closed CaptionSelect Input labels Input LabelsDisplay labels of Connected devices Select the terminal and label of the external equipmentDisplay the menu Select Timer Using TimerSelect the timer to set Set the timerConnect with Recommended AV ConnectionsTo watch DVDs To listen to the TV through speakersRatings List for Lock Age-based Possible Content Description GroupSelections Closed caption CC Technical InformationAspect Ratio Format Message Data format for SD Card browsing SD Card warning messages Meaning 32 mm 24 mmViera LinkTM Hdavi ControlTM Picture modeHdmi connection Digital Audio OUT terminalsSize Input signal that can be displayedAspect Ratio Aspect Ratio FULL/JUSTH-FILL/ZOOMCare and Cleaning This is not a malfunction Check the position, direction, and connection of the antennaBright or dark Some spots remainChaotic image, noisy No image isSpecifications On-Site or Carry-In Service Limited Warranty CoverageLimited Warranty Limits And Exclusions One Panasonic Way Secaucus, New JerseyAccessory Purchases United States and Puerto Rico Customer Services Directory United States and Puerto RicoPanasonic Product Limited Warranty Limited Warranty for CanadaAnotación del cliente Customer’s RecordAmbler Drive
Top Page Image Contents