Panasonic TX-37LZ800A INPUT1 Select the external input, Menu Adjustments / Configurations options

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.

You can also listen to PC sound with the audio cable connected. To connect PC (p. 36)

INPUT1 Select the external input

OPTION SD CARD

EXIT

2	Select “PC”
	InputAV1 Selection

RETURN

AV2

AV3

AV4

PC

HDMI1

HDMI2

HDMI3

TV

access

select

•Corresponding signals (p. 42)

•If “H-freq.” or “V-freq.” is shown in red, the signals may not be supported.

•

■To return to TV

■PC menu setting (changed as desired)

•To make settings “How to Use Menu Functions” to (p. 18)

Menu		Item		Adjustments / Configurations (options)
			R-Gain	Adjusts the white balance for red areas
Picture
	Advanced		G-Gain	Adjusts the white balance for green areas
			B-Gain	Adjusts the white balance for blue areas
	PC
	Settings		Gamma	(2.0 / 2.2 / 2.5)
			Reset to	Press the OK button to reset to the default settings
			Default
			Input	Switches to a wide view
				VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
			Resolution	•XGA (1,024 × 768 pixels), WXGA (1,366	× 768 pixels)
			Clock	•Options change depending on signals
				Set to the minimum level if noise occurs
			H-pos	Adjusts horizontal position
Setup	PC
			V-pos	Adjusts vertical position
	Setup
				Eliminates flicker and distortion
			Clock Phase	•Adjust after Clock adjustment	•Set to the minimum level if noise occurs
			Sync	PC sync signal type (H & V / On G)
				H & V : Horizontal and Vertical sync from your PC (Most common sync format)
				•On G : Sync on Green sync from your PC
			Reset to	Press the OK button to reset to the default settings
			Default
•Other	items		p. 20 and p. 21

Displaying PC•Screen on TV Input Labels

Advanced

29