Panasonic TX-37LZD850A operating instructions Update, TV’s, Software System

Download new software to TV.

•For details (p. 41)

If System Update is performed, the software will be updated (it may change TV functions). If you do not wish to do so, set “Auto Update Search in Standby” to Off.

Select “Auto Update Search in Standby” and then set “On” or “Off”

	System Update			On: Automatically performs
Update	Auto Update Search in Standby	On	set	•a search in standby and
	System Update Search Now
			select	downloads an update, if any
TV’s
				software updates are available
software	Note
system	When the TV is switched to standby, there will be a clicking sound after a short delay.
	•Similar clicking sounds will also occur at 3:00 AM and 5:00 AM (p. 41) when “Auto update
System
	Search in Standby” is set to “On”. These sounds are normal.
Update

■To update immediately

Select
“System Update Search Now”	Searches for an	Download
start	update (for several
	min.) and displays
select	a corresponding	Download may take
	message if any	•for about 20 min.

Note

•During downloading, the TV will display a blank screen for 40 to 50 seconds. Do not interrupt the TV during this procedure.

•DVB Settings (DVB)

Adjust the standard time

Region

Select

Adjust for Summer Time

Daylight

Saving Time

Select the region where you live to adjust the standard time.

•The time contained in the broadcast signal is UTC (Universal Time coordinated) formally known as GMT (Greenwich Mean Time).

Select time offset from the standard time for Summer Time.

•Normally select “Auto”.

•If there is a gap between displayed time and actual time, set this function.

Region	Standard time		Daylight Saving Time: Auto
			(During Summer Time)
NSW / ACT	+10:00		+11:00
Victoria
Queensland		+10:00
South Australia	+9:30		+10:30
Western Australia	+8:00		+9:00
Northern Territory		+9:30
Tasmania	+10:00		+11:00
			(Based on GMT)

Advanced

23