FAQs
Problem | Actions |
|
|
Chaotic image, noisy | Set |
•Check nearby electrical products (car, motorcycle, fluorescent | |
| •lamp). |
Screen
No image can be displayed | •(p.Is “Colour”20) | or “Contrast” in the Picture Menu set to the minimum? |
Check Colour System. (p. 25) | ||
| ••Check AV Colour System. (p. 21) | |
Blurry or distorted image | •Reset programme. (p. 25) | |
(no sound or low volume) | ||
Unusual image is displayed | •again.Turn off the TV with Mains power On / Off switch, then turn it on |
No sound is produced
Sound
Sound level is low or sound is distorted
•Is “Sound mute” active? (p. 7)
•Is the volume set to the minimum?
•Sound signal reception may be deteriorated.
•Check Sound system. (p. 25)
HDMI
| Set the sound setting of the connected equipment to “2ch L.PCM”. |
Sound is unusual | •Check the “HDMI1 Input” setting in the Sound Menu. (p. 20) |
•If digital sound connection has a problem, select analogue sound | |
| •connection. (p. 39) |
Pictures from external equipment | Is the HDMI cable connected properly? (p. 36) |
•Turn Off the TV and equipment, then turn them On again. | |
are unusual when the equipment | •Check an input signal from the equipment. (p. 40) |
is connected via HDMI | ••Use an equipment compliant with |
TV goes into “Standby mode”
Other
The remote control does not work
•Off Timer function is activated.
•Theends.TV enters “Standby mode” about 30 mins. after broadcasting
•Are the batteries installed correctly? (p. 6)
•Has the TV been switched On?
42