Panasonic TX-26LXD70A, TX-32LXD70A warranty Select the external input, Select PC, Menu Adjustments

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.

You can also listen to PC sound with the audio cable connected. To connect PC (p. 32)

INPUT	1	Select the external input
ASPECT	EXIT
OK

MENU		RETURN	2	Select “PC”
				Input Selection
	OPTION DIRECT TV REC			AV1
				AV2
				AV3
1	2	3		AV4
				PC
				HDMI1
4	5	6		HDMI2
				TV

7 8 9

0

access

select

•Corresponding signals (p. 36)

•If “H-freq.” or “V-freq.” is shown in red, the signals may not be supported.

VCR

■To return to TV

■PC menu setting (changed as desired)

•To make settings “How to Use Menu Functions” to (p. 18)

Menu		Item		Adjustments / Configurations (options)
			R-Gain	Adjusts the white balance for red areas
Picture	Advanced		G-Gain	Adjusts the white balance for green areas
			B-Gain	Adjusts the white balance for blue areas
	PC
	Settings		Gamma	(2.0 / 2.2 / 2.5)
			Reset PC	Press the OK button to reset to the default settings
			Settings
			Input	Switches to a wide view
				VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
			Resolution	•XGA (1,024 × 768 pixels), WXGA (1,366	× 768 pixels)
			Clock	•Options change depending on signals
				Set to the minimum level if noise occurs
				Adjusts horizontal position
Setup			H-pos
	PC		V-pos	Adjusts vertical position
	Setup
				Eliminates flicker and distortion	•Set to the minimum level if noise occurs
			Clock Phase	•Adjust after Clock adjustment
			Sync	PC sync signal type (H & V / On G)
				H & V : Horizontal and Vertical sync from your PC (Most common sync format)
				•On G : Sync on Green sync from your PC
			Reset PC	Press the OK button to reset to the default settings
•Other items			Settings
			p. 20 and p. 21

HDMI Functions

HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high- quality sound by connecting the TV and the equipment.

HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box or a DVD player, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.

About connections, see “External Equipment” (p. 32).

Note
HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.
•Audio settings can be made on the “HDMI1 Input” menu screen. (p. 20)
•Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
•HDMI2 terminal is for digital audio signal only.
•Use with a PC is not assumed.
•If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.
•These HDMI connectors are “type A”.
•These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright
•protection.
An equipment having no digital output terminal may be connected to the input terminal of either “Component”,
•“S-VIDEO”, or “Video” to receive analogue signals.							•
The HDMI input terminal can be used with only the following image signals:
•480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.
•For details of the applicable HDMI signals, see p. 36.							Displaying
■DVI connection
If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (∗2).							•
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal
(HDMI1: use AUDIO IN terminals).
							HDMIFunctions PC ScreenonTV
■DVI Position Settings
If the picture position is not fit to the screen during the DVI connection, adjust the position on “DVI Position
Settings” in Setup Menu. The settings are memorized for each HDMI terminals and input signals.
•To make settings				Adjusts horizontal position
			“How to Use Menu Functions”		to	(p. 18)
Menu		Item				Adjustments
Setup			H-pos				Advanced
	DVI Position			Adjusts vertical position
	Settings		V-pos
			Reset	Press the OK button to reset to the default settings
			DVI Position
			Settings
					(∗1): The HDMI logo is displayed on HDMI-compliant equipment.
					(∗2): Enquire at your local digital equipment retailer shop.

28 29