Installation
Please use the apparatus only with the stands supplied or with appropriate wall mount kits. Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including refl ections) will fall on the screen.
Use of some types of fl uorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For best performance, Antenna cables should utilize 75 Ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components require. Also determine the lenght of cable you `ll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures,
How to use the LCD stand
Adjust the LCD panel to your desired angle. |
| ||
The LCD panel can be adjusted the following direction: | |||
20° | Right | ||
| |||
20° | Left |
| |
5° | Front |
| |
10° | Back |
| |
| (View from the top) |
| |
Maintenance
To clean this set, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in
•Use eyeglass cleaner to remove stubborn dirt from the LCD.
•Never use alcohol, paint thinner or benzine to clean this set.
•Before using chemically treated cloth, read the instructions that came with the cloth carefully.
•Do not wipe the LCD with water.
Wipe the cabinet with a soft cloth.
Neutral detergent
If the cabinet is heavily soiled, wipe with a
CAUTION:
If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction may result.
4